Toward Resource Recovery from Textile Wastewater: Dye Extraction, Water and Base/Acid Regeneration Using a Hybrid NF-BMED Process

Jiuyang Lin,Wenyuan Ye,Jie Huang,Borrego Ricard,Marian-Cornel Baltaru,Benjamin Greydanus,Stefan Balta,Jiangnan Shen,Maria Vlad,Arcadio Sotto,Patricia Luis,Bart Van der Bruggen
DOI: https://doi.org/10.1021/acssuschemeng.5b00234
IF: 8.4
2015-01-01
ACS Sustainable Chemistry & Engineering
Abstract:In this work, textile wastewater is explored for resource recovery in a hybrid loose nanofiltration (NF)-bipolar membrane electrodialysis (BMED) process for fractionation of dyes and salt, in view of dye purification and water and salt reuse. A loose nanofiltration membrane, i.e., Sepro NF 6 (Ultura), found to have a low salt rejection (0.27% in 120 g.L-1 NaCl solution) and high rejection for direct dyes and reactive dyes (>= 99.93%), was used for fractionation of dye/salt mixtures through diafiltration. In diafiltration, the addition of pure water with a volume factor of 5.0 can effectively remove the NaCl salt by using Sepro NF 6 with an invariable dye concentration, in view of the recovery of high purity dyes. The overall salt rejections in diafiltration for the dye/salt mixtures with 40, 50 and 60 g.L-1 NaCl are 2.2%, 1.8% and 1.1%, respectively, enabling a further treatment by BMED. Subsequently, application of BMED for reuse of salt-containing NF permeate demonstrates that desalinated water with similar to 100 ppm of NaCl can be obtained, and base/acid can be produced from the salts without any membrane fouling by dyes. Therefore, the hybrid loose NF-BMED process allows for resource (i.e., dye, salt and pure water) extraction from textile wastewater, which closes the salt and water cycle, in view of process intensification.
What problem does this paper attempt to address?