Abstract:In the past few years there has been a significant rise in the short-circuit current levels in transmission and distribution networks, it due to the increasing demands on power and the addition of sources of distributed generations. It leads to the need of integration of novel protection systems such as the superconducting fault current limiters (SFCLs), ... . SFCL models on the electric distribution networks largely rely on the insertion of a step or exponential resistance that is determined by a predefined quenching time. However, beyond the framework of these models, the study of the performance, reliability, and location strategy for the installation of sole or multiple SFCLs in power grids still lacks of proper development leading to the utter need of comprehensive and systematic studies on this issue. In this paper, we expand the scope of the aforementioned models by considering the actual behaviour of a SFCL in terms of the temperature dynamic power-law dependence between the electrical field and the current density. Our results are compared with step-resistance models for the sake of discussion and clarity of the conclusions. Both SFCL models were integrated into a power system model built based on the UK power standard, and the impact of these protection strategies on the performance of the overall electricity network was studied. As a representative renewable energy source, a 90 MVA wind farm was considered for the simulations. Three fault conditions have been simulated, and the figures for the fault current reduction predicted by both fault current limiting models have been compared in terms of multiple current measuring points and allocation strategies...

A Consideration on the Extension of the Dead Time by Superconducting Fault Current Limiter

Research of the Coupling Transformer in the New Bridge-Type Solid State Fault Current Limiter System

Performance Analysis on a Flux Coupling Superconducting Fault Current Limiter (SFCL) Considering the Power Grid Integration Based on MATLAB/SIMULINK

Effects of a Flux-Coupling Type Superconducting Fault Current Limiter on the Surge Current Caused by Closed-Loop Operation in a 10kv Distribution Network

Application of a modified flux-coupling type superconducting fault current limiter to transient performance enhancement of micro-grid

Study on Magnetic-Shield-type Air-Core Transformer Coupling SSFCL

Impact of Solid State Fault Current Limiter on Double-source Systems

Test of Controllable Impedance Type Fault Current Limiter Based on Air-core Superconducting Transformer

Study Of The Three-Phase Saturated Transformer Coupling New Bridge-Type Ssfcl

Study of Superconducting Fault Current Limiters for MMC-MTDC with HVDC CBs

Improved Fault Current Limiting Characteristics of Three-Phase Transformer Type SFCL With Non-Separated Secondary Windings Due to Unsymmetrical Ground Fault Types

Implementation of Resistive Type Superconducting Fault Current Limiters in Electrical Grids: Performance Analysis and Measuring of Optimal Locations

EFFECT OF NOVEL FAULT CURRENT LIMITERS ON POWER SYSTEM TRANSIENT'STABILITY

A Novel Six-Leg Three-Phase Fault Current Limiter

Analysis on DC Fault Current Limiting Operation of Twice-Quench Trigger Type SFCL Using Transformer Considering Magnetizing Current and Current Limiting Reactor

Study on Novel Air-Core Transformer Type SCFCL with a Trigger Winding

Superconducting Fault Current Limiter (SFCL) for Fail-Safe DC-DC Conversion: from Power Electronic Device to Micro Grid Protection

A novel configuration approach of SFCLs in the power grid and its economic analysis

Improved Setting Method of Distance Protection with the SSFCL

Simulation Study of New Solid-State Fault Current Limiter

An Economical Three-Phase Fault Current Limiter Considering Different Types of Fault