Abstract:Fluorine High-temperature Reactor (FHR) is a novel reactor type without water-cooling, but with a high outlet temperature. Small Modular FHR is convenient for modular assembly and transportation. Therefore, it is suitable for remote and water shortage areas to provide efficient and clean nuclear energy. The neutronics and heat transfer of the fuel are the key issues when the small modular FHR has high thermal power output. This research proposes the fuel - TRISO (TRi-ISOtropic) particles dispersed in Helical Cruciform Fuel (HCF). HCF can be selfsupported in radial direction, no additional grid-spacers are required, which can decrease the pumping power and improve the efficiency of the reactor system. For small modular FHR, it can be disassembled, transported, and assembled better without grid-spacers and simplifying the core structure. The heat transfer capacity of the coolant also could be further improved because of the special structure of HCF. Based on the Monte-Carlo particle transport code MCNP, the neutronic characteristic from the assembly to the whole core of FHR is studied. By obtaining the fission power distribution in near-critical condition, the thermal-hydraulics of the single most heated HCF and 7 bundle HCF in the heated assembly are calculated. In order to preliminary analyze the thermalhydraulics of the whole core scale, the thermal-hydraulics analysis of porous media is carried out for 1/6 core. The isotropic resistance tensor and thermal equilibrium porous model have been introduced with reasonable approximation, and porous resistance relation has been carried out. The radial power peak factor is 1.185 and the axial power peak factor is 1.435 in near-critical condition, which proves the arrangement of the HCF and the control rods can flatten the power distribution effectively. The average temperature of the coolant outlet in the active region of the core is 974.44 K, and the average temperature of the upper plenum outlet is 972.85 K. High coolant outlet temperature can ensure effective supply of high-temperature process heat. And the highest temperature of the fuel is 1271.49 K, which is lower than the limitation 1573 K. The parameters of this research can supply the neutronics and thermal-hydraulics references for further FHR design.

On the improvements in neutronics analysis of the unit cell for the pebble-bed fluoride-salt-cooled high-temperature reactor

The Impacts of Random Effect and Scattering Effects on the Neutronics Analysis of the PB-FHR

The Impacts of Thermal Neutron Scattering Effect and Resonance Elastic Scattering Effect on FHRs

Influence of Doppler Broadening Rejection Correction on Neutronics of PB-FHR

Improved Resonance Calculation of Fluoride Salt-Cooled High-Temperature Reactor Based on Subgroup Method

Burnup analysis of the pebble-bed fluoride-salt-cooled high-temperature reactor based on the Chord Length Sampling method

Thermal-Hydraulic Analysis of A Fluoride-Salt-Cooled Pebble-Bed Reactor with Cfd Methodology

Study of the Neutronic and Thermal Coupling Effect on VHTR Fuel Pebble Using OpenMC and OpenFOAM

Computational Fluid Dynamics Analysis of a Fluoride Salt–Cooled Pebble-Bed Test Reactor

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Homogenized Cross-Section Generation for Pebble-Bed Type High-Temperature Gas-Cooled Reactor Using NECP-MCX

Thermal analysis of pebble-bed reactors based on a tightly coupled mechanical-thermal model

Effects Of Applying The Implicit Particle Fuel Model For Pebble-Bed Reactors

Parametric Study of Effective Thermal Conductivity for VHTR Fuel Pebbles Based on a Neutronic and Thermal Coupling Method

The Preliminary Neutronics Analysis for a 10 MW Molten Salt Reactor with Solid Fuel

Analysis of Limiting Safety System Setting Based on Computational Fluid Dynamics Methodology for a Fluoride Salt Cooled High Temperature Reactor

A New Method of Fuel Pebble Temperature Calculation Based on Neutronic and Thermal Coupling Equivalent Model

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

Effect of Nuclear Data on Fuel Element Neutronic Characteristicsof Pebble-bed High Temperature Gas-cooled Reactor

High-Fidelity Neutronics and Thermal-Hydraulics Analysis of Helical Cruciform Fuel Based on Small Modular Fhr

Burnup analysis for the pebble-bed fluoride-salt-cooled high-temperature reactor based on the energy-dependent elastic scattering cross-sectional model