Abstract:Explosive welding is well known for its capability to join a wide variety of both similar and dissimilar metals. The strengths of the welded composite plates are largely influenced by the bonding strengths of the welding interfaces, which generally exhibit a periodic wavy shape. The measurement of the tensile properties of the bonding interface is challenging due to the difficulties in preparing conventional direct tensile specimens arising from the millimeter-sized thickness of the flyer plate. In this paper, a novel small-sized (15 mm x 14 mm x 8 mm) double-T-shaped specimen was designed to study the tensile properties and failure mechanisms of the titanium/steel bonding interface, in which a clamping apparatus was used to apply compressional load on the specimen to generate tensile stress. The quasi-static (similar to 0.001/s) tension was conducted using the Instron MTS and the high strain rate (2000-5000/s) tension was performed using the split Hopkinson pressure Bar apparatus. Further, the microstructure of interfacial zone was characterized by optical microscopy, scanning electron microscopy and energy dispersive spectrometer. The experimental results indicated that the interface strength increased with increasing strain rate, showing an obvious positive strain rate effect. The fluctuation in tensile strengths and failure strain of the titanium/steel bonding interface were due to the presence of non-uniform defects, (e g. cavities, cracks and brittle intermetallic etc.) formed on the bonding interface. Those defects as discontinuities and stress concentration points would result in degraded mechanical properties. The fracture morphology mainly reveals brittle fracture under quasi-static, while ductile fracture existed in some zone at high strain rate. Failure mainly occurred in the bonding interface near the steel side from the interface, which showed microcracks, cleavage plane, tearing ridges, dimples, fragmentation of brittle intermetallic compounds. Meanwhile, the double-T-shaped specimen has proven to be effective to measure the tensile mechanical properties of the interface of materials with small thickness.

Deformation and Fracture of Explosion-Welded Ti/Al Plates: A Synchrotron-Based Study

In-situ Observation of Crack Evolution in Ti/Al Laminated Composite

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Tensile Behavior of the Titanium-Steel Explosive Welded Interface under Quasi-Static and High-Strain Rate Loading

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Dynamic Shear Localization of a Titanium Alloy under High-Rate Tension Characterized by X-Ray Digital Image Correlation

High strain rate deformation of explosion-welded Ti6Al4V/pure titanium

In Situ Observation of Deformation Behavior in a Ti600/Ti2AlNb Electron Beam Welded Joint

In-situ investigation on tensile properties of a novel Ti/Al composite sheet

Microstructure and mechanical properties investigation of explosively welded titanium/copper/steel trimetallic plate

Experimental and Numerical Study on Microstructure and Mechanical Properties of Ti-6Al-4V/Al-1060 Explosive Welding

In Situ Investigation of the Tensile Deformation of Laser Welded Ti2alnb Joints

Dynamic Shear Fracture Toughness and Failure Characteristics of Ti–6Al–4V Alloy under High Loading Rates

Anisotropy in Microstructure and Shear Properties of TA2/Q235 Explosive Welding Interfaces

Adiabatic Shear Fracture in Ti-6Al-4V Alloy

Revealing Tensile Behaviors and Fracture Mechanism of Ti–6Al–4V Titanium Alloy Electron-Beam-welded Joints Using Microstructure Evolution and in Situ Tension Observation

Microstructure and characterization of Ti–Al explosive welding composite plate

In-Situ Investigation on Tensile Deformation and Fracture Behaviors of Ti60 Alloy Rolled Sheet with Equiaxed Microstructure

Anisotropic Deformation and Damage of Dual-Phase Ti-6Al-4V under High Strain Rate Loading

Investigation of interfacial structure and dynamic mechanical behavior of titanium alloy laminated composites

Microstructural Evolution and Mechanical Properties of Heat-Treated Titanium Alloy Plates Subjected to Underwater Explosion