Abstract:Three experimental approaches are presented to determine the mixing characteristics of a new kind of high-efficiency membrane dispersion minireactor in which microfiltration membranes are applied as the dispersion media. Residence time distribution (RTD) curves were measured for determining the macromixing characteristics. A typical Dushman reaction (iodide-iodate) coupled with a neutralization and precipitation reaction of BaSO4 were introduced to characterize the micromixing performance of a single-phase mixing process. A dye extraction method was also applied to study the micromixing performance of a two-liquid phase-mixing system. The RTD result showed that the flow performance in the minireactor was almost in the plug flow condition. The micromixing performance was expressed with a segregation index, which could be < 0.002. The single-phase micromixing performance reached the desired level. The result of precipitation of BaSO4 showed that the mixing performance had a substantial influence on the particle size and size distribution. It was found that in the single-phase mixing process the mixing performance was mainly influenced by the phase flux and the membrane pore size. With decreasing dispersed fluid flux or the membrane pore size, or with increasing continuous fluid flux, the micromixing performance was enhanced. The dye extraction method can correctly determine the mixing performance of a two-liquid phase-mixing system. Unlike the single-phase mixing process, in the two-liquid phase-mixing process there was a minimum value for the mixing efficiency with the change of the continuous or dispersed-phase flux, when the membrane pore size was > 0.9 mu m. (c) 2005 American Institute of Chemical Engineers.

Computational Fluid Dynamics Analysis of the Micromixing Efficiency in A Rotating-Packed-Bed Reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Computational Fluid Dynamic(cfd) Simulation of Micromixing in a Rotating Packed Bed

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor

Mixing characteristics of fixed bed bubble reactor

CFD Analysis of Flow Patterns and Micromixing Efficiency in a Y-Type Microchannel Reactor

Micromixing Simulation of Novel Large-Double-Blade Impeller

Computational fluid dynamic simulation of fluid flow in a rotating packed bed

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

A turbulent mass diffusivity model for analyzing the mixing characteristics in an impinging stream-rotating packed bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Characterization and modeling of micromixing performance in micropore dispersion reactors

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Experimental Investigation on Micromixing Characteristics of Coaxial Mixers in Viscous System

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

Characterization of Micromixing Intensification of Impinging Jet Flow on a Spinning Disk Reactor with a Structured Surface

Configuration of a Premixer and Grooved Surface to Intensify the Micromixing Performance of a Spinning Disc Reactor

Radially Layered Configuration for Improved Performance of Packed Bed Reactors