Abstract:This paper proposes different optimization schemes for enhancing the performance of conventional continuous composite girder bridges with corrugated steel webs. In particular, for the positive moment region, the substitution of a ribbed steel plate for the reinforced concrete bottom flange is proposed for optimizing such bridges. Three-dimensional finite-element analysis was used to preliminarily validate this optimization scheme based on the background project, Dongbaohe Xinan Grand Bridge. An experimental study revealed that the optimization scheme can afford advantages, such as reduced self-weight, avoidance of cracking in the bottom flange, and convenient construction. If the steel plate with proper thickness is used, higher flexural stiffness and load capacity can be achieved as additional advantages due to the enhanced steel ratio of the cross section. For the negative moment region of the bridge, the optimization scheme was implemented in two parts identified as Optimization Schemes I and II. In Scheme I, corrugated steel plate-concrete composite webs were used, whereas a steel-concrete composite bottom flange was further adopted in Scheme II. Compared to the conventional scheme, both Optimization Schemes I and II significantly reduced the shear stress in the corrugated steel web and at the steel-concrete interface due to the lined concrete in the web. Thus, it can be deduced that the applied load corresponding to the yield of the corrugated steel web will be enhanced; namely, the shear capacity will be enhanced. Because shear connection failure was prevented in both optimization schemes, there were remarkable improvements of the load capacity and ductility of the girder. The confining effect of the lined concrete decreased the prestress lead-in ratio, but not significantly. In addition, Optimization Scheme II afforded much greater construction convenience compared to both Optimization Scheme I and the conventional scheme. (C) 2016 American Society of Civil Engineers.

Shear-Friction Behavior of Groove Interface in Concrete Bridge Rehabilitation

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Shear-friction behavior of concrete-to-concrete interface under direct shear load

Mechanical behavior of composite joints for connecting existing concrete bridges and steel–concrete composite beams

Mechanical Behavior of the Interface of Composite Cross Beam in Old Concrete Bridges Widened with Steel-Concrete Composite Beam

Calculation of Long-Term Slippage for Externally Prestressing Steel-Concrete Composite Beam

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Safety Testing And Assessment Of Existing Reinforced Concrete Plate Girder Bridges Before And After Rehabilitation

Behavior of Grouped Stud Shear Connectors Between Precast High-Strength Concrete Slabs and Steel Beams

Experimental Study on Bond Behavior Between CFRP and Concrete with Longitudinal Grooves

Experimental study on longitudinal shear behavior of prefabricated steel-concrete composite beams with notched connections

Load stress in concrete pavement on concrete bridges

Experimental Study on Shear Transfer Across Interfaces with Post-Installed Shear Reinforcement

Experiment Analysis on Crack Resistance in Negative Moment Zone of Steel-Concrete Composite Continuous Girder Improved by Interfacial Slip

The Rehabilitation of Pile Foundation of A Concrete Continous Bridge in Guangzhou City

Interface Shear Behavior Between High-Strength Precast Girders and Lightweight Cast-in-place Slabs

An analysis of the mechanical properties of precast steel fiber reinforced concrete pavement joints

Optimized Prestressed Continuous Composite Girder Bridges with Corrugated Steel Webs

Shear connector performance analysis for composite bridge deck with corrugated steel sheeting

Inspection, Analysis and Loading Test of a Slab Bridge Strengthened with FRP Laminates