Mechanical Behavior of the Interface of Composite Cross Beam in Old Concrete Bridges Widened with Steel-Concrete Composite Beam

聂建国,王宇航,樊健生,张晓光

DOI: https://doi.org/10.15951/j.tmgcxb.2012.03.006

2012-01-01

Abstract:In old concrete bridges widened with steel-concrete composite beams, the connection is accomplished by using a composite cross beam. There has been no experimental study on the mechanical behavior of such composite cross beams. Six specimens were tested and based on existing methods, the shear strength of interface of old and new concrete was calculated. The results showed that shear failure of the interface of old and new concrete is the cause of failure of composite cross beam in old concrete bridges widened with steel-concrete composite beams. There was nearly no slip between old and new concrete before bonding failure of the interface. The interface of old and new concrete had good ductility and high strength. Based on the constitutive law of the materials, a three-stage mechanical model was proposed for the interface of old and new concrete. The load-slip relationship was also predicted. Comparison between analytical and experimental results showed that the analytical method has enough precision. The ultimate shear strength of the interface was determined by strength of concrete, rough degree of interface, and friction coefficient. The normal stress could increase the ultimate shear strength of the interface. The residual shear strength of the interface was determined by the embedded bars, and the ratio and yielding strength of the embedded bars were the main influence factors. The design method was proposed.