Experimental Study on Bond Behavior Between CFRP and Concrete with Longitudinal Grooves

Yijiang Liu,Chaoyang Zhou,Lirong Chen,Yi Wang

DOI: https://doi.org/10.1016/j.istruc.2024.106654

IF: 4.1

2024-01-01

Structures

Abstract:Hybrid strengthening method was proposed in this study to prevent the debonding failure of carbon fiber reinforced polymer (CFRP), in which a self-locking anchorage that can prevent the end debonding and concrete grooving that can impede the intermediate debonding were incorporated. However, due to the complexity of the strengthening system, the mechanism of bond contributions of each part remains unclear. To reveal the normal and shear bond mechanism, pull-off and single-shear tests were carried out respectively. The influences of bonding surfaces in groove, groove size and strengthening method were taken into consideration. The results show that the normal bond strength contributed by the groove-side is lower than that by the groove-bottom, while the trend of the shear strength is opposite. Compared with the purely bonded cases, the bonding property of specimens with grooving improved significantly, the normal bond and shear strengths can increase up to 33.3% and 380.6% respectively. As the groove depth increases (from 0 to 15 mm), the normal bond strength increases linearly while the shear strength increases first but then drops, reaching the highest bond strength when the groove depth was 10 mm. The groove width has insignificant effect on the bond behavior. Although the increase of groove depth enlarges the bonding area, the corresponding stress concentration leads to negative result. In addition, the stress transfer efficiency can be further improved by incorporating the hybrid anchorage. Finally, a calculation model for bond strength of specimens with grooves was proposed, which has a good agreement compared to the experimental values.