Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.

Bending Vector Sensor Based on the Multimode-2-Core-Multimode Fiber Structure

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Compact omnidirectional multicore fiber-based vector bending sensor

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

Micro-Bending Vector Sensor Based on Six-Air-Hole Grapefruit Microstructure Fiber Using Lateral Offset Splicing

Temperature-insensitive vector curvature sensor based on four-core fiber offset structure

In-Fiber Mach-Zehnder Interferometer Based on Three-Core Fiber for Measurement of Directional Bending

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Design of Two-Dimensional Bending Vector Sensor Based Onselective Infiltration of Photonic Crystal Fiber

Temperature-compensated fiber directional-bend sensor based on a sandwiched MMF–PMPCF structure

Experimental Investigation of Bending Sensor Based on Helical Structure in Hollow Core Fiber

Seven-Core Fiber Composite Structures-Based Mach-Zehnder Interferometer for Bending and Temperature Measurement

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Multi-parameter Measurement Sensor Based on No-Core Fiber

Composed multicore fiber structure for direction-sensitive curvature monitoring