Abstract:The effect of shear stress on strain development and pore water accumulation resulting from principal stress rotation tests on intact Hangzhou soft clay using a Zhejiang University hollow cylinder apparatus (ZJU-HCA) is reported. Different types of tests were designated, including a shearing test along the fixed principal stress direction, a pure rotation test, and both clockwise and anti-clockwise rotation tests. The mean principal stress was kept constant in all tests. The intermediate principal stress coefficient (b) was set to 0.5. The pore pressure coefficient, deduced using a double yield surface theory, revealed that the volume yield surface function was not affected by the rotation of the principal stress axes. The pore water pressure in the fixed principal stress direction test and in the pure rotation test was shown to be mainly controlled by the shear stress level. As the results revealed that the anticlockwise rotation would have a higher effect on pore water pressure than clockwise rotation, the pore water pressure generated in the clockwise rotation test was relatively small. Because b was set to 0.5, the radial strain was very small. The development of the axial strain was symmetrical to the circumferential strain, which coincided with the horizontal symmetry of the axial stress and circumferential stress. Both the shear stress level and rotation angle have a pronounced effect on strain development. When soil subjected to pure principal stress rotation under the conditions of high stress levels, large strains would be expected and any underestimation will lead to insecurity. If the specimen experienced a preceding rotation, its influence on the strain development in the subsequent rotation was significant. The variation of octahedral shear stiffness G(oct) with rotation angle also demonstrated the deterioration of the preceding rotation in the following rotation.

Microstructure Study on Intact Clay Behavior Subjected to Cyclic Principal Stress Rotation

Study Of Microstructures Of Soft Clay Under Dynamic Loading Considering Effect Of Cyclic Stress Ratio And Frequency

Microstructure Behavior Of Intact Soft Clay After Principal Stress Rotation

Intact soft clay responses to cyclic principal stress rotation in undrained Condition

Effects of principal stress rotation and cyclic confining pressure on behavior of soft clay with different frequencies

Deformation of Intact Soft Clay under Principal Stress Rotation with Effect of Intermediate Principal Stress

Critical properties of intact soft clay under cyclic principal stress rotation

Influences of Stress Magnitude and Loading Frequency on Cyclic Behavior of K0-consolidated Marine Clay Involving Principal Stress Rotation

Impact of Shear Stress on Strain and Pore Water Pressure Behavior of Intact Soft Clay under Principal Stress Rotation

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Research on influence of principal stress axis cyclic rotation at low shear stress level on behavior of intact clay

ELASTO-PLASTIC DEFORMATION BEHAVIOR OF INTACT CLAY SUBJECTED TO PRINCIPAL STRESS ROTATION

Undrained Response of Reconstituted Clay to Cyclic Pure Principal Stress Rotation

Changing Mechanism of Microstructure of Intact Soft Clay Considering Anisotropy

Cyclic response of natural soft marine clay under principal stress rotation as induced by wave loads

Influence of Shear Stress Level on Cyclic Deformation Behaviour of Intact Wenzhou Soft Clay under Traffic Loading

Experimental Study of Stress-Strain Properties of Intact Soft Clay Considering the Change of Principal Stress Direction

Experimental Study on Degradation of Stiffness of Saturated Soft Clay under Undrained Cyclic Loading

Microstructure Investigation of Soft Clay Subjected to Triaxial Loading

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

Study On Strength Criterion Of Intact Soft Clay After Monotonic Principal Stress Rotation