Abstract:The integration of high-temperature resistant geopolymer concrete, reinforced with basalt fiber reinforced polymer (BFRP), addresses several challenges encountered by conventional reinforced concrete structures, such as elevated energy consumption, substantial carbon emissions, and susceptibility to steel corrosion. To investigate the impact of geopolymer concrete cover on the mechanical performance of BFRP bars after high temperature treatment, this study conducted mechanical tests on a total 406 tensile specimens and 406 transverse shear specimens, spanning a temperature range from ambient temperature to 700 °C. The BFRP bars with diameters of 6 mm, 12 mm, and 16 mm underwent heat treatment durations of 0 h, 1 h, 2 h, and 3 h. Subsequently, they were examined for mass loss rat, residual tensile properties, and residual shear strength following natural cooling. Notably, this study also compared the impact of different geopolymer concrete cover thickness (30 mm, 40 mm, and 50 mm) on these performance parameters. The test results revealed that with an increase in heating temperature, the resin of BFRP experienced decomposition, leading to alterations in surface morphology, as well as changes in tensile and shear failure modes. In the temperature range of 400 °C to 700 °C, bare BFRP bars exhibited a significant decrease in both tensile and transverse shear strengths, with strength loss rates ranging from 50% to 90%. Moreover, the degradation in shear strength was comparatively slower than that in tensile strength. The presence of geopolymer concrete cover effectively mitigated the strength degradation of BFRP bars following high temperature treatment, and this protective effect improved with an increase in the concrete cover thickness. Additionally, scanning electron microscope (SEM) analysis was employed to elucidate the damage mechanisms for both bare and geopolymer concrete-covered BFRP bars. SEM results indicated that the deterioration induced by high temperature treatment gradually propagated radially from the edge to the core area of the bar. Finally, a simplified calculation model was adopted to evaluate the residual tensile strengths of BFRP bars wrapped in geopolymer concrete after high temperature treatment.

Flexural Fatigue Behavior of a Pultruded Basalt Fiber Reinforced Epoxy Plate Subjected to Elevated Temperatures Exposure

Experimental Study on the Mechanical Properties of Basalt Fibres and Pultruded Bfrp Plates at Elevated Temperatures

Combined Effects of Sustained Tensile Loading and Elevated Temperatures on the Mechanical Properties of Pultruded BFRP Plates

Effects of Elevated Temperatures on the Mechanical Properties of Basalt Fibers and BFRP Plates

Creep Behavior Of Resin Matrix And Basalt Fiber Reinforced Polymer (Bfrp) Plate At Elevated Temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Tension-tension fatigue performances of a pultruded carbon fiber reinforced epoxy plate at elevated temperatures

Mechanical Property Evolution and Life Prediction of Carbon Fiber and Pultruded Carbon Fiber Reinforced Polymer Plate Exposed to Elevated Temperatures

Structural Classification of Basalt FRP at High Temperatures

Influence of elevated temperature on the mechanical and thermal performance of BFRP rebar

Effect of geopolymer concrete cover on improving tensile and transverse shear behaviors of BFRP bars after exposure to high temperature

Effects of exposure to elevated temperatures and subsequent immersion in water or alkaline solution on the mechanical properties of pultruded BFRP plates

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Mechanical properties of polyvinyl alcohol-basalt hybrid fiber engineered cementitious composites with impact of elevated temperatures

High-Temperature Effect on the Tensile Mechanical Properties of Unidirectional Carbon Fiber-Reinforced Polymer Plates

Research on Dynamic Mechanical Properties and Constitutive Model of Basalt Fiber Reinforced Concrete after Exposure to Elevated Temperatures under Impact Loading

Experimental Research on Mechanical Behavior of GFRP bars under High Temperature

Interfacial Performance of Aramid, Basalt and Carbon Fiber Reinforced Polymer Bonded Concrete Exposed to High Temperature

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Thermomechanical Behavior and Microstructure Properties of Carbon Fiber Reinforced Polymer at Elevated Temperatures

Influence of Basalt Fiber on the Mechanical Properties and Deformation Failure of Concrete after High Temperature