Abstract:A tribo-oxide layer is generally formed on the contact surfaces during the high temperature friction and wear process, which significantly influences the tribological properties of the materials. In this work, the evolution mechanism of tribo-oxide layer for nickel-based superalloy was studied. High temperature sliding wear tests were performed at the different sliding time from 1 min to 60 min for nickel-based superalloy (Ni-16Cr-13Co-4Mo) against a Si3N4 ball at 800°C under ambient environment. Morphology and chemical composition of the worn surface and wear debris were investigated using a Scanning electron microscope (SEM), X-Ray diffraction (XRD) and Raman spectroscope. The cross-sectional microstructure and element distribution of the worn surface and untested area were characterized by EDS mapping attached to the SEM. Results show that the evolution of tribo-oxide layer can be divided into three stages. The first stage is characterized by the formation of a mixed oxide layer due to the preferential oxidation of Cr, Al and Ti in the preheating and temperature holding process. In the second stage, a dense tribo-oxide layer is formed by compacting and sintering the wear debris retained on the worn surface accompanying the inner oxidation of the dissolved γ' phase and Cr in the alloy. In the third stage, the oxide layer with a layered structure formed with an outmost layer composed of mixed oxides with a spinel structure and an inner oxide layer played a barrier role to prevent further oxidation of the substrate. It is speculated that the change in the structure of spinel oxides at high temperature from order to disorder led to the decrease in shear stress, eventually resulted in the reduction of friction coefficient and the low wear rate.

Effect of Sliding Speed and Loads on Tribological Behaviors of Iron and Cobalt-Based High-Temperature Alloys Against Al2O3 Balls

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

Influences of counterparts on the high-temperature tribological properties and glaze layer formation of pre-oxidized cobalt-based alloys

Effects of Tribo-Film on Wear Resistance of Additive Manufactured Cobalt-Based Alloys During the Sliding Process

The Effect of Applied Load and Rotation Speed on Wear Characteristics of Al-Cu-Li Alloy

Dry Friction Characteristics of Ti-6Al-4V Alloy under High Sliding Velocity

Dry Sliding Wear Behavior Of Hot-Dip Aluminized Ti-6al-4v Alloy Against Gcr15 Steel

The Relationships Between Tribological Behaviour and Heat-Transfer Capability of Ti6Al4V Alloys

Effect of V Doping on the High Temperature Tribological Properties of (ti1−xvx)3alc2 Solid Solutions Sliding Against Different Counterparts

Tribocorrosion Behavior of NiCoCrMoCu Alloys Containing Different Carbides in Acidic Media at Various Applied Loads and Sliding Speeds

Tribological Behavior Comparisons of High Chromium Stainless and Mild Steels Against High-Speed Steel and Ceramics at High Temperatures

Dry Sliding Wear Behavior of Ti-6Al-4V Alloy in Air

Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces

Dry Sliding Wear Behavior of Hot-Dip Aluminized Ti-6Al-4V Alloy As a Function of Sliding Velocity

Effects of Sliding Speed on Tribological Behaviors and Tribochemical Reactions of Alumina in HFC-134a Gas

Study On The Tribological Properties Of Titanium Alloys Sliding Against Wc-Co During The Dry Friction

Sliding Wear Behaviors of the AlNiTi Amorphous Coatings: Effect of Temperatures

Effect of Rotational Sliding Velocity on Micro Tribological Behaviors of Cu50Zr50Amorphous Alloy Foils

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

Effects of environment on dry sliding wear of powder metallurgical Ti-47Al-2Cr-2Nb-0.2W

Effects of Temperature on Friction and Wear Behaviors of TiAl Alloy and SiC Counterpart