Abstract:This paper presents an investigation to find out how lubrication parameters affect lubrication characteristics of gear transmission systems for the purpose to acquire enhanced lubrication performance for such systems through design optimization. A novel high precision roller enveloping reducer is selected, and effects of key parameters on its lubrication performance were thoroughly studied. The key parameters include oil viscosity, immersion depth, rotation speed of the worm gear, worm arrangement, and volume of oil recess. Taguchi method was then applied to optimize those parameters to achieve an enhanced lubrication performance in the roller enveloping reducer. The research approach employed for this study can be described as follows: at first, a numerical simulation study was performed and simulation results were validated using experimental data; next, design domains for the key parameters were created over a wide range of values, and the design of experiments (DOE) method was applied to determine how the parametric values affect the lubrication characteristics via numerical calculations; afterwards, analysis of variance (ANOVA) was performed to determine the parametric values that would lead to the optimal lubrication performance. Our results showed that the novel roller enveloping reducer can provide desirable lubrication and meshing performance by applying the optimal parametric values. In our study, the lubrication performance is indicated in terms of churning losses and number of lubrication particles. Effects of the key parameter on them are discussed in this paper. This study presents a design method for screening the optimal parameters for best lubrication performance of gear systems. The employed research approach can be applied for lubrication design of other transmission systems.

Study on Starved Lubrication Performance of a Cycloid Drive

Simulation Analysis for Lubrication State of the Thrust Washer Within Straight Planetary Gear Set

Thermal elastohydrodynamic lubrication analysis of helical gear pair under starved lubrication condition

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Kinematic-Geometric Lubrication Theory and Its Application to Arc-Toothed Cylindrical Worm Drive

Lubrication Performance of Helical Gear Pair Under Dynamic Load Based on Local Involute Profile

Study on the Effect of Starved Lubrication on the Dynamic Characteristics of Locally Failed Roller Bearings

A Two-Dimensional Starved Lubrication Analysis Method for Textured Surfaces

Starved Lubrication Analysis of Angular Contact Ball Bearing Based on a Multi-Degree-of-freedom Tribo-Dynamic Model

Experimental Investigation of Lubrication Film Starvation of Polyalphaolefin Oil at High Speeds

Analysis of the thermal lubrication characteristics of cycloid pinwheel transmission mechanisms in RV reducers

Fully Flooded, Starved and Parched Lubrication at a Point Contact System

Investigation on Tooth Surface Wear of Cycloid Drives Considering Tooth Profile Modifications

Predicting Film Parameter and Friction Coefficient for Helical Gears Considering Surface Roughness and Load Variation

A Numerical Solution to the Thermal Elastohydrodynamic Lubrication of Circular Arc Gears

Optimization of cycloid wheel shaping based on thermal mixed lubrication and wear characteristics

The Numerical Solution to Line Contact Elastohydrodynamic Problems under Heavy Load

Predicting Fatigue Life for Finite Line Contact under Starved Elastohydrodynamic Lubrication Condition

Study on the influence of key design parameters on lubrication characteristics of a novel gear system applying Taguchi method

Mixed lubrication analysis of modified cycloidal gear used in the RV reducer

Investigation On The Performance Of Compression Ring-Cylinder Liner System Under Starved Lubrication