Abstract:This work presents an overview of the mechanical response and microstructure evolution of specifically oriented pure magnesium single crystals under plane strain compression at room temperature. Crystals of 'hard' orientations compressed along the c-axis exhibited limited room temperature ductility, although pyramidal ⟨c + a⟩ slip was readily activated, fracturing along crystallographic 112 ̄4 planes as a result of highly localized shear. Profuse 101 ̄2 extension twinning was the primary mode of incipient deformation in the case of orientations favorably aligned for c-axis extension. In both cases of compression along ⟨112 ̄0⟩ and ⟨101 ̄0⟩ directions, 101 ̄2 extension twins completely converted the starting orientations into twin orientations; the subsequent deformation behavior of the differently oriented crystals, however, was remarkably different. The formation of 101 ̄2 extension twins could not be prevented by the channel-die constraints when c-axis extension was confined. The presence of high angle grain boundaries and, in particular, 101 ̄2 twin boundaries was found to be a prerequisite for the activation of 101 ̄1 contraction twinning by providing nucleation sites for the latter. Prismatic slip was not found to operate at room temperature in the case of starting orientations most favorably aligned for prismatic slip; instead, cooperative 101 ̄2 extension and 101 ̄1 contraction twinning was activated. A two-stage work hardening behavior was observed in 'soft' Mg crystals aligned for single or coplanar basal slip. The higher work hardening in the second stage was attributed to changes in the microstructure rather than the interaction of primary dislocations with forest dislocations.

Crystal Plasticity Analysis of Plane Strain Deformation Behavior and Texture Evolution for Pure Magnesium

An Elastic–viscoplastic Crystal Plasticity Modeling and Strain Hardening for Plane Strain Deformation of Pure Magnesium

Crystal Plasticity Behavior of Single-Crystal Pure Magnesium under Plane-Strain Compression

Grain growth-induced strain softening in nanocrystalline magnesium: experiments and modelling

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

Crystal Plasticity Model and Simulations for Single Crystal Magnesium

Numerical simulation of plastic behavior and meso inhomogeneous deformation in AZ31 Mg alloy

Simulation of Texture Evolution in Magnesium Alloy: Comparisons of Different Polycrystal Plasticity Modeling Approaches

Crystal Plasticity Modeling of Texture Evolution and Heterogeneity in Equal Channel Angular Pressing of Aluminum Single Crystal

Crystal Plasticity Modeling and Neutron Diffraction Measurements of a Magnesium AZ31B Plate: Effects of Plastic Anisotropy and Surrounding Grains

Crystal Anisotropy of AZ31 Magnesium Alloy under Uniaxial Tension and Compression

Modeling of plastic deformation of magnesium alloys with random texture: A challenge to constitutive model for twinning

Study on the Internal Stress and Thermal Anisotropy in Magnesium Alloys Using a Thermal Elastic Viscoplastic Self-Consistent Model.

On the Plasticity and Deformation Mechanisms in Magnesium Crystals

Plastic deformation of magnesium single crystal: a crystal plasticity coupled twinning phase field simulation

The Polycrystalline Plasticity Due to Slip and Twinning During Magnesium Alloy Forming

Self-Consistent Crystal Plasticity Modeling of Slip-Twin Interactions in Mg Alloys

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Deformation Analysis of Magnesium Alloy Based on Crystal Plasticity Theory

Effect of Stress State on Plastic Behavior, Deformation Mechanism and Texture Evolution of an Mg-Gd-Y Alloy: Experiment and Multi-Scale Simulation

Crystal Plasticity Simulation of the AZ31B Alloy Sheet under Uniaxial Deformation Considering Grain Boundary Sliding