Abstract:Three-dimensional carbon nanotube field-effect transistors (3D CNTFETs) possess predictable characteristics that rival those of planar CNTFETs and Si-based MOSFETs. However, due to the lack of a reliable assembly technology, they are rarely reported on, despite the amount of attention they receive. To address this problem, we propose the novel concept of a 3D CNTFET and develop its assembly strategy based on nanomanipulation and the electron-beam-induced deposition (EBID) technique inside a scanning electron microscope (SEM). In particular, the electrodes in our transistor design are three metallic cuboids of the same size, and their front, top and back surfaces are all wrapped up in CNTs. The assembly strategy is employed to build the structure through a repeated basic process of pick-up, placement, fixing and cutting of CNTs. The pick-up and placement is performed through one nanomanipulator with four degrees of freedom. Fixing is carried out through the EBID technique so as to improve the mechanical and electrical characteristics of the CNT/electrodes connection. CNT cutting is undertaken using the typical method of electrical breakdown. Experimental results showed that two CNTs were successfully assembled on the front sides of the cubic electrodes. This validates our assembly method for the 3D CNTFET. Also, when contact resistance was measured, tens of kilohms of resistance was observed at the CNT-EBID deposition-FET electrodes junction.. This manifests the electrical reliability of our assembly strategy.

A Nanoscale Technique For The Large-Scale Assembly Of Carbon Nanotubes Device

Large-Scale Assembly of Single-Walled Carbon Nanotube Field Effect Transistor

Study on the large-scale assembly and fabrication method for SWCNTs nano device

High Yield Assembly of Single-Walled Carbon Nanotube Field Effect Transistor

Assembly and Fabrication of Single-Wall Carbon Nanotube Field Effect Transistor Using Dielectrophoresis Method

A Method Study on Assembly of Single-Wall Carbon Nanotube Field Effect Transistor Using Dielectrophoresis

A Nanoscale Technique Of The Assembly Approach For Inas Nanowire Nano Device

Large-scale directed assembly of single-walled carbon nanotube devices by alternating current coupling dielectrophoresis

Research of large-scale directed assembly of carbon nanotube film

A Deterministic Process for Fabrication and Assembly of Single Carbon Nanotube Based Devices

Large-Scale Assembly Of Single-Walled Carbon Nanotubes Based On Aqueous Solution

High-Performance, Hysteresis-Free Carbon Nanotube Field-Effect Transistors Via Directed Assembly

A Study On The Assembly Method Of Single Carbon Nanotube Based On Nanomanipulation Robot

Assembly of Carbon Nanotube Devices by Tip-Induced Optical Trapping

Dielectrophoretic assembly of carbon-based nanomaterials

Nanomanipulation of a single carbon nanotube for the fabrication of a field-effect transistor

Extending the fabrication of micro-and nanoscale structures from a planar to non-planar metal surface by femtosecond laser filament

"Study On Assembly Method For Gaas Nanowires Device" (Vol 151, Pg 187, 2014)

Assembly of a CNT-FET Based on Nanorobotic Manipulation System Inside a SEM

3D Assembly of Carbon Nanotubes for Fabrication of Field-Effect Transistors Through Nanomanipulation and Electron-Beam-Induced Deposition

High-Performance, Hysteresis-Free Carbon Nanotube FETs via Directed Assembly