Abstract:As the most important structure to enhance fuel assembly CHF and increase economic efficiency of reactors, mixing vane spacer grids have always been the focus of numerical simulations and experimental studies. Currently, the design of commercial mixing vane grids strongly depends on full-scale thermal hydraulic experiments, which are expensive and time consuming. With the recent development of computer technology, numerical studies using computational fluid dynamics (CFD) have been conducted to enhance the understanding and design of commercial mixing vane grids. In current numerical simulations of spacer grid mixing effect, most researchers do not distinguish the impact from different components, but look to encompass all component effects of the entire spacer grid including those of vanes, dimples, springs, and straps for their overall mixing performance. In this paper, two spacer grids were modeled to obtain the effects of the mixing vane and dimple respectively. Four grids of different vane angles and three grids of different dimple shapes were examined. First, the effect of vane angle was examined using four different grids of different vane angles without the presence of dimples or spring. Then, both mixing vanes and dimples were added to the grids in order to investigate the compound mixing effects caused by dimples with the presence of mixing vane. During this series of study, the dimple shape was changed while keeping the vane angle fixed. Two different commercial codes, CFX and STAR-CD, were applied to study the flow field under the same operating conditions to provide code-tocode benchmarking. As a basic verification, the results of CFD simulated pressure drop were compared against experimental data. Relatively good agreement between the experimental and simulated pressure drops was obtained. Code to code comparison indicated that different CFD codes provide similar results with slight variations. Further work is needed with more experimental data to verify the turbulence effects and benchmark the CFD results under various thermal hydraulic conditions.

CFD analysis on mixing effects of spacer grids with different dimples and sizes for advanced fuel assemblies

Numerical study on the effects of vane angle and dimple on the thermal hydraulic performance of a pwr fuel assembly

Numerical Investigation on the Characteristics of Two-Phase Flow in Fuel Assemblies with Spacer Grid

CFD Assist in Design of Spacer-Grid with Mixing-Vane for a Rod Bundle

Cfd Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer

Numerical investigation on mixing performance in rod bundle with spacer grid based on anisotropic turbulent mixing model

Application of the Improved Spacer Grid Model in Subchannel Analysis Code

Influence of Spacer Grid Outer Strap on Fuel Assembly Thermal Hydraulic Performance

The Effects of Spacer Grid Arrangement on Flow Boiling Characteristics and Critical Heat Flux in a Complex 5 × 5 Rod Bundle Channel

Numerical Investigation of Flow and Heat Transfer Characteristics of Subcooled Boiling in a Single Rod Channel With/without Spacer Grid

CFD Analysis on Subcooled Boiling Phenomena in PWR Coolant Channel

CFD Simulation of Flow and Heat Transfer Characteristics in a 5×5 Fuel Rod Bundles with Spacer Grids of Advanced PWR

Numerically simulating the thermal–hydraulic characteristics within the fuel rod bundle using CFD methodology

Heat Transfer Analysis on Dimple Geometries and Arrangements in Dimple Jacketed Heat Exchanger

Flow distribution analysis of annular fuel with spacer grid

General flow sweeping mixing model for subchannel analysis and application to three rod bundles with different typical spacer methods

Numerical Study of Bubble Coalescence and Breakup in the Reactor Fuel Channel with a Vaned Grid

Effect of Dimple Depth-Diameter Ratio on the Flow and Heat Transfer Characteristics of Supercritical Hydrocarbon Fuel in Regenerative Cooling Channel

Numerical Investigation of the Effect of Mixing Vanes on Subcooled Boiling in a 3 × 3 Rod Bundle Channel with Spacer Grid

Single-phase Flow in Helical Cruciform Fuel Assembly with Conjugate Heat Transfer

Numerical investigations of flow in nuclear fuel assembly with spacer grid and OpenFOAM validation