Abstract:We report on the design, fabrication and testing of three types of coupling structures for hybrid chalcogenide glass Ge23Sb7S70-Silicon (GeSbS-Si) photonic integrated circuit platforms. The first type is a fully etched GeSbS grating coupler defined directly in the GeSbS film. Coupling losses of 5.3 dB and waveguide-to-waveguide back-reflections of 3.4% were measured at a wavelength of 1553 nm. Hybrid GeSbS-to-Si butt couplers and adiabatic couplers transmitting light between GeSbS and Si single-mode waveguides were further developed. The hybrid butt couplers (HBCs) feature coupling losses of 2.7 dB and 9.2% back-reflection. The hybrid adiabatic couplers (HACs) exhibit coupling losses of 0.7 dB and negligible back-reflection. Both HBCs and HACs have passbands exceeding the 100 nm measurement range of the test setup. GeSbS grating couplers and GeSbS-to-Si waveguide couplers can be co-fabricated in the same process flow, providing, for example, a means to first couple high optical power levels required for nonlinear signal processing directly into GeSbS waveguides and to later transition into Si waveguides after attenuation of the pump. Moreover, GeSbS waveguides and HBC transitions have been fabricated on post-processed silicon photonics chips obtained from a commercially available foundry service, with a previously deposited 2 μm thick top waveguide cladding. This fabrication protocol demonstrates the compatibility of the developed integration scheme with standard silicon photonics technology with a complete back-end-of-line process.

Silicon waveguide grating coupler for perfectly vertical fiber based on a tilted membrane structure

Compact High-Efficiency Perfectly-Vertical Grating Coupler on Silicon at O-band.

High Efficiency Grating Coupler for Coupling Between Single-Mode Fiber and SOI Waveguides

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

Highly Efficient and Perfectly Vertical Chip-To-Fiber Dual-Layer Grating Coupler

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Subwavelength TE/TM Grating Coupler Based on Silicon-on-insulator

High-efficiency Apodized-Imaging Chip-Fiber Grating Coupler for Silicon Nitride Waveguides

Design of a Completely Vertical, Polarization-Independent Two-Dimensional Grating Coupler with High Coupling Efficiency

High-efficiency hybrid amorphous silicon grating couplers for sub-micron-sized lithium niobate waveguides.

High-Efficiency Unidirectional Dual-Wavelength-Band Grating Coupler with 1D Subwavelength Structure

Experimental Demonstration of an Apodized-Imaging Chip-Fiber Grating Coupler for Si_3N_4 Waveguides

Inverse design of near unity efficiency perfectly vertical grating couplers

Compact Vertical Grating Coupler with an Achromatic In-Plane Metalens on a 220-Nm Silicon-on-insulator Platform

Fabrication-friendly High-Efficiency Silicon Nitride Grating Coupler

Highly Efficient Nonuniform Grating Coupler for Silicon-on-insulator Nanophotonic Circuits.

Perfectly Vertical Grating Coupler for O and C-band

Vertical Coupling Between Waveguides and Optical Fibers Utilizing Polarization Gratings

Compact, Broadband, and Wide-Angle Optical Coupling for Silicon Waveguide

Broadband Couplers for Hybrid Silicon-Chalcogenide Glass Photonic Integrated Circuits

Birefringence compensated silicon nanowire arrayed waveguide grating for CWDM optical interconnects.