Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Indirect tire pressure monitoring system based on tire vertical stiffness

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Static Tire Properties Analysis and Static Parameters Derivation to Characterising Tire Model Using Experimental and Numerical Solutions

Study of Novel Passive Tire Pressure Monitoring System Based on Integrated Sensor

EXPERIUMENT AND FINITE ELEMENT ANALYSIS OF STEADY-STATE TEMPERATURE DISTRIBUTION IN ROLLING TIRE UNDER DIFFERENT LOADS AND INITIAL INFLATION PRESSURES

Research on Load Prediction Model Construction Method of the Tire Condition Monitoring System

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Research on the compensation method of Indirect Tire Pressure Monitoring under Sinusoidal Driving Condition

Influence factors on measurement of longitudinal stiffness and lateral stiffness of tire

VERIFICATION OF THE SIMULATION MODEL WITH ACTUAL EXPEIMENTATION OF VERTICAL STIFFNESS PASSENGER CAR TIRES UNDER A STATIC LOAD

Design of the RF Technology Tire Pressure Monitoring System

A Universal Approach to Tire Forces Estimation by Accelerometer-Based Intelligent Tire: Analytical Model and Experimental Validation

Numerical simulation on influence of tire pressure to stress distribution in wheel

Study on Tire Pressure Monitoring Sensor

A Spoke Strain-Based Method to Estimate Tire Condition Parameters for Intelligent Tires

A Design of Intelligent Tire Prototype Based on Multiple Accelerometers

A Low-Cost Tire Pressure Loss Detection Framework Using Machine Learning.

A Fusion Estimation of Tire Vertical Forces Using Model-Based Tire State Estimators for a Dual-Sensor Intelligent Tire

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Tire Pressure Monitoring System Based on Resonant Frequency of Wheel Speed Spectrum

Study on the Dynamic Characteristics of Automobile Tire