Abstract:Friction or lubrication process is a typical process of the energy dissipation. It can be reasonably described and speculated by using the entropy increase and dissipative structure theory of the non-equilibrium thermodynamics. In this paper, we model and analyze the typical thin-film lubrication mechanism based on the theory of thermodynamics, by using the interfacial disjoining pressure to characterize the dominant role of the solid-lubricant interaction on a microscale and establishing the lubrication Stribeck curve based on thermodynamic concepts. The concept of entropy production is adopted to describe the lubrication system, which is defined as the sum of multiplications of the thermodynamic forces and flows. Then the variations and the competing relations between the pairs of thermodynamic forces and flows could be used to reveal the different factors dominated in the lubrication system, such as the solid-liquid interaction, the sliding velocity, and the normal load. In this paper, we assume that all the dissipated energy caused by the viscous resistance of lubricant is converted into heat, then the total entropy increase per surface area at the frictional interface is considered, affected by interfacial disjoining pressure and the one-dimensional heat flow. With the entropy increasing analysis of lubrication process, we find that when the entropy production in the steady state becomes minimum, the total energy dissipation due to friction also becomes minimum, which directly indicates the lowest friction coefficient point at the lubrication Stribeck curve. Moreover, when a lubrication system loses its stability slightly from the equilibrium state, self-organization may occur at the solid-lubricant interface, thus resulting in partially ordering interfacial structures, which may indicate the interfacial structures when tribosystem turns from hydrodynamic lubrication phase into thin-film lubrication phase. In the experimental aspect, the location of the lowest friction coefficient point at the Stribeck curve has a very good correspondence to the minimum entropy point predicted by our thermodynamic model, and the lubrication transition process from hydrodynamic phase to thin-film phase can be explained quite well by the theory of dissipative structures when the system loses its stability. Furthermore, a calculation model of the friction coefficient for thin-film lubrication is obtained when considering the dominant contribution of the solid-lubricant interfacial interaction through an equivalent force method. The calculation data correspond well to the experimental results. In summary, thermodynamic model could effectively characterize the lubrication process in mechanism by revealing the involved multi-scale effect, multi-physical effect and nonlinear coupling effect.

Experimental and Theoretical Investigations on the Nanoscale Kinetic Friction in Ambient Environmental Conditions

The Effects of Humidity on the Velocity-Dependence and Frictional Ageing of Nanoscale Silica Contacts

Experimental Study of the Effect of Humidity on Structural Changes of the "Third Body" during Friction

Frictional Behavior of a Micro-sized Superconducting Fiber in a Low-Temperature Medium: Experimental and Computational Analysis

Experimental Study on Molecular Arrangement of Nanoscale Lubricant Films—a Review

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Simulation experiment study on friction and wear of materials under high humidity conditions

Numerical Model for Hydration-Lubricated Contact and Its Friction Behavior at Nanoscale

Load-velocity-temperature relationship in frictional response of microscopic contacts

Nano-tribology Through Molecular Dynamics Simulations

Effects of Load and Relative Humidity on Micro-friction

Nature of dynamic friction in a humid hydrophobic nano-contact

Structural and Environmental Dependence of Superlow Friction in Ion Vapour-Deposited A-C : H : Si Films for Solid Lubrication Application

Numerical modelling of macro lubricity in conjunctions with nanometer-thick liquid films

Nanofriction Mechanisms Derived from the Dependence of Friction on Load and Sliding Velocity from Air to UHV on Hydrophilic Silicon

Experimental testing of the Prandtl-Tomlinson model: Molecular origin of rotational friction

Liquid-Phase Friction of Two-Dimensional Molybdenum Disulfide at the Atomic Scale

Influence of different fluid environments on tactile perception and finger friction

Experimental testing of the Prandtl–Tomlinson model: Molecular origin of rotational friction

Thermodynamic Analysis of Lubrication Considering Solid-Liquid Interface Interaction

Transition of frictional states and surface roughness effects in lubricated contacts