Abstract:In this work, the polypyrrole modified with copper phthalocyanine‑3,4′,4″,4‴‑tetrasulfonic acid tetrasodium salt (CuPcTs), named as c-PPy, was mixed with different carbon nanomaterials (single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), graphene (G), graphene oxide (GO), signal-walled carbon nanohorns (CNH)) to investigate the influence on the capacitance performance. Herein, compared with the specific capacitance of c-PPy, the c-PPy/SWCNTs exhibited the maximum specific capacitance according to cyclic voltammetry (CV) curves at the scan rate of 1 to 100mVs−1 and the maximum specific capacitance was 238Fg−1 @ 1mVs−1. The c-PPy/MWCNTs exhibited the highest specific capacitance according to galvanostatic charge/discharge (GCD) characteristics at the current density of 0.1 to 1Ag−1, while the c-PPy/SWCNTs exhibited the highest specific capacitance at the current density of 1 to 10Ag−1. The capacitance performance of c-PPy/G hybrid electrodes was larger than that of c-PPy electrode, while that of c-PPy/GO and c-PPy/CNH hybrid electrodes was smaller. And the specific capacitance of c-PPy/SWCNTs hybrid electrodes was slightly decreased at high current densities and scan rates. The capacitance retention of c-PPy/MWCNTs and c-PPy/SWCMTs hybrid electrodes was approximately 80% and 75% (after 6000cycles). It was assumed that the crosslink of CNTs was overlapped with c-PPy in c-PPy/CNTs hybrid electrodes to construct a three dimension (3D) porous conductive network to provide ion diffusion channels, electron transport pathways, high specific surface area and active sites. The cowered G played a slightly positive influence on the construction of continuous conductive c-PPy network, while the relative flat GO had a very negative impact. The particle-like CNH was not tightly adhered to the fiber-like c-PPy, which made the fluffy hybrid nanostructure. Therefore, the c-PPy/SWCNTs can be used as the active electrode of high-capacity energy storage devices.

Effects of Potential Modes on Performances of Electrodeposited Poly[Ni(salen)]/MWCNTs Composite As Supercapacitor Electrode Material

Electrochemical Deposition of Poly[N,N '-Ethylene-bis(salicylideneiminato)- Nickel(Ii)] Nanobelts As Electrode Materials for Supercapacitors

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Electropolymerization and Energy Storage of Poly[ni(salphen)]/mwcnt Composite Materials for Supercapacitors

Growth and Electrochemical Behavior of Poly[Ni(saldMp)] on Carbon Nanotubes As Potential Supercapacitor Materials

Carboxylated multi-walled carbon nanotube/polyaniline composites for high-performance supercapacitor electrodes

Electropolymerization of Ni(salen) on Carbon Nanotube Carrier As a Capacitive Material by Pulse Potentiostatic Method

Design of NiCo 2 O 4 nanoparticles in-situ grown on lignin-derived porous carbon and MWCNTS composites for supercapacitors

The Effect of Carbon Particle Morphology on the Electrochemical Properties of Nanocarbon/polyaniline Composites in Supercapacitors

Fabrication of Carbon Nanotubes/Polypyrrole/Carbon Nanotubes/Melamine Foam for Supercapacitor

Rational Synthesis of Carbon Shell Coated Polyaniline/mos2 Monolayer Composites for High-Performance Supercapacitors

Electropolymerization and Electrochemical Performance of Salen-Type Redox Polymer on Different Carbon Supports for Supercapacitors

High-performance Supercapacitor Electrode Materials of MoS2/PPY Nanocomposites Prepared by In-Situ Oxidative Polymerization Method

NiCoP/MXene nanocomposites via electrostatic self-assembly for high-performance supercapacitor electrodes

Supercapacitor electrode materials with hierarchically structured pores from carbonization of MWCNTs and ZIF-8 composites

Preparation and Characterization of A Poly[Ni(Salen)]/Multiwalled Carbon Nanotube Composite by in Situ Electropolymerization As A Capacitive Material

Electrochemical Deposition of PANI/PEDOT:PSS Composite Polymer for Supercapacitors Application

Asymmetric supercapacitor performance of hydrothermally-synthesized MWCNT-WO 3 composite electrode

Electrochemical Polymerization and Energy Storage for Poly[Ni(salen)] As Supercapacitor Electrode Material

Preparation and Electrochemical Properties of NiCo2S4@Carbon Nanotube Constructed Flexible Film Electrode for Supercapacitors

Well-constructed CNT mesh/PANI nanoporous electrode and its thickness effect on the supercapacitor properties