Abstract:In this work, the polypyrrole modified with copper phthalocyanine‑3,4′,4″,4‴‑tetrasulfonic acid tetrasodium salt (CuPcTs), named as c-PPy, was mixed with different carbon nanomaterials (single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), graphene (G), graphene oxide (GO), signal-walled carbon nanohorns (CNH)) to investigate the influence on the capacitance performance. Herein, compared with the specific capacitance of c-PPy, the c-PPy/SWCNTs exhibited the maximum specific capacitance according to cyclic voltammetry (CV) curves at the scan rate of 1 to 100mVs−1 and the maximum specific capacitance was 238Fg−1 @ 1mVs−1. The c-PPy/MWCNTs exhibited the highest specific capacitance according to galvanostatic charge/discharge (GCD) characteristics at the current density of 0.1 to 1Ag−1, while the c-PPy/SWCNTs exhibited the highest specific capacitance at the current density of 1 to 10Ag−1. The capacitance performance of c-PPy/G hybrid electrodes was larger than that of c-PPy electrode, while that of c-PPy/GO and c-PPy/CNH hybrid electrodes was smaller. And the specific capacitance of c-PPy/SWCNTs hybrid electrodes was slightly decreased at high current densities and scan rates. The capacitance retention of c-PPy/MWCNTs and c-PPy/SWCMTs hybrid electrodes was approximately 80% and 75% (after 6000cycles). It was assumed that the crosslink of CNTs was overlapped with c-PPy in c-PPy/CNTs hybrid electrodes to construct a three dimension (3D) porous conductive network to provide ion diffusion channels, electron transport pathways, high specific surface area and active sites. The cowered G played a slightly positive influence on the construction of continuous conductive c-PPy network, while the relative flat GO had a very negative impact. The particle-like CNH was not tightly adhered to the fiber-like c-PPy, which made the fluffy hybrid nanostructure. Therefore, the c-PPy/SWCNTs can be used as the active electrode of high-capacity energy storage devices.

High-performance Supercapacitor Electrode Materials of MoS2/PPY Nanocomposites Prepared by In-Situ Oxidative Polymerization Method

In Situ Growth of Polypyrrole Onto Three-Dimensional Tubular Mos2 As an Advanced Negative Electrode Material for Supercapacitor

In Situ Intercalative Polymerization of Pyrrole in Graphene Analogue of Mos2 As Advanced Electrode Material in Supercapacitor

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Generation of Monolayer MoS2 with 1T Phase by Spatial‐Confinement‐Induced Ultrathin PPy Anchoring for High‐Performance Supercapacitor

Hydrothermal Synthesis of Polypyrrole/MoS2 Intercalation Composites for Supercapacitor Electrodes

Synergistic effects of polyoxometalate with MoS2 sheets on multi-walled carbon nanotubes backbone for high-performance supercapacitor

MnO2/polypyrrole Nanotubular Composites: Reactive Template Synthesis, Characterization and Application As Superior Electrode Materials for High-Performance Supercapacitors

Poly(3,4-Ethylenedioxythiophene)/Mos2 Nanocomposites with Enhanced Electrochemical Capacitance Performance

Enhanced Electrochemical Performances of Organ-Like Ti3C2 MXenes/polypyrrole Composites As Supercapacitors Electrode Materials

High Conductivity Graphene-Like MoS2/polyaniline Nanocomposites and Its Application in Supercapacitor

Porous Hybrid Composites of Few-Layer MoS2 Nanosheets Embedded in a Carbon Matrix with an Excellent Supercapacitor Electrode Performance.

Enhancement of energy storage performance of supercapacitors based on MoS2-g-C3N4 Nanocomposite electrodes

Rational Synthesis of Carbon Shell Coated Polyaniline/mos2 Monolayer Composites for High-Performance Supercapacitors

One-Step Hydrothermal Synthesis of MoO2/MoS2 Nanocomposites as High-Performance Electrode Material for Supercapacitors.

An effective interaction in polypyrrole/nickel phosphide (PPy/Ni 2 P) for high-performance supercapacitor

Synthesis of polypyrrole nanotubes@nickel-molybdenum sulfide core–shell composites for aqueous high-performance asymmetric supercapacitors

Nanorod Structure of Polypyrrole-covered MoO 3 for Supercapacitors with Excellent Cycling Stability

Collaborative Improvement Electrochemical Properties of Supercapacitor Electrodes by Loading MoS 2 Nanosheets on Biomass Hierarchical Porous Carbon

Synthesis And Characterization Of A Novel Tube-In-Tube Nanostructured Ppy/Mno2/Cnts Composite For Supercapacitor

Synthesis and Property of Novel MnO2@polypyrrole Coaxial Nanotubes As Electrode Material for Supercapacitors