Abstract:Objectives: This paper presents the effect of silane treatment of S-2 Glass fibres on the fracture toughness and water sorption/solubility behaviour of fibre-reinforced flowable dental composites. The effect of epoxy- and methacrylate-based silane coupling agents (SCAs) on the mechanical strength and hydrolytic properties were investigated. The concentration of the selected SCAs on the mechanical and physical properties were investigated. The influence of molecular structure and concentration in the interfacial adhesion at the fibre-matrix interfaces was also studied. Methods: Short S-2 Glass fibres of 250 µm in length and 5 µm in diameter were etched with acid to remove any impurities and roughen the surface. The acid-etched fibres were silane treated with 3MPS, 3GPS, and 8MOTS at different concentrations by weight (%). The silane-treated fibres were incorporated at 5 % into the dental resin mixture. Untreated fibres were added at 5 % to the dental resin mixture and served as the control group. The physical properties such as water sorption, solubility, and desorption along with mechanical properties such as fracture toughness and total fracture work of the fibre-reinforced dental composites grafted with the above-mentioned SCAs were evaluated. The surface morphology of the fractured surface was studied and analysed. Results: The fracture toughness tests showed that the dental composites grafted with optimum weight per cent (wt. %) concentration of the SCA had a better stress intensity factor (KIC) when compared to the 2.0 wt. % and 3.0 wt. % concentration. The KIC value of dental composites grafted with untreated surface etched glass fibres was less than the KIC values of dental composites grafted with optimum concentrations of 3MPS, 3GPS, and 8MOTS by 81.6 %, 38.6 %, and 110.5 %, respectively. A similar trend was found while investigating the total work of fracture of the dental composites, between optimum concentration, 2.0 wt. % and 3.0 wt. % concentration of respective SCA. The increase in silane concentration also led to an increase in the water sorption/solubility characteristics. The absorption of water was most severe in the fibre-reinforced dental composites without silane treatment (32.9 µg/mm3). The ANOVA results showed that the fibre-reinforced dental composites grafted with 8MOTS at optimum concentration showed an increase in fracture toughness when compared to optimum concentrations of 3GPS and 3MPS by 51.9 % and 15.9 %, respectively. The enhanced mechanical and physical characteristics are due to the increased adhesion between the fibre and silane achieved from the optimum wt. % concentration of 8MOTS. Similarly, dental composites grafted with 8MOTS at optimum concentration showed a decrease in water sorption characteristics when compared to optimum concentrations of 3GPS and 3MPS by 18.2 % and 0.6 %, respectively. The decreased water sorption characteristics at the optimum concentration of 8MOTS could be due to the reduced availability of reactive hydroxyl groups and the hydrophobic characteristics of 8MOTS. Significance: Silane coupling agents (SCAs) are important components of dental composites. The type and concentration of SCA have a significant effect on material properties. The current study focuses on understanding the effects of different SCAs and wt. % concentrations on the interfacial fracture behaviour and the influence of different SCAs on the water sorption and solubility behaviour of S-2 Glass fibre-reinforced flowable dental composites.

Effect of Amount of Silane Coupling Agent on Flexural Strength of Dental Composite Resins Reinforced with Aluminium Borate Whisker

Aluminum borate whiskers modified by silane coupling agent to enhance bending force of PMMA

[Three methods with functions of modification on aluminum borate whisker and with influence on flexural properties of dental composite resins]

[Influence of different amount of silane coupling agent on the flexural strength of PMMA/nanometer ZrO2 composites].

Hybrid Effects of Zirconia Nanoparticles with Aluminum Borate Whiskers on Mechanical Properties of Denture Base Resin Pmma

Mechanical and Thermal Properties of Denture Pmma Reinforced with Silanized Aluminum Borate Whiskers

Effect of Silane Coupling Agent on Composite-Composite Bond Strength: an in Vitro Study

Influence of Coupling Agents on Properties of Aluminum Borate Whiskers Modified BMI Resin

The study on the reinforcement of filling amount of potassium titanate whisker on the bending strength of dental composite resin

Study on Cyanate Ester Resin/Glass Fiber Composites Reinforced by Aluminium Borate Wisker

Effect of silane coupling agent and concentration on fracture toughness and water sorption behaviour of fibre-reinforced dental composites

The effect of long-chain silane coupling agent on the bond strength between ceramic and resin cement

Aluminum-Borate-Whiskers-Reinforced Bismaleimide Composites. 1: Preparation and Properties

[The Effect of Different Dispersive Methods on Flexural Strength Nano-Zro(2) Reinforced Denture Polymethyl Methacrylate].

The Effect of Hydrofluoric and Silane Coupling Agent on the Bonding Strength Between IPS E.max Press Ceramic and Resin Cement

Effects of Tetrapod-Like Zinc Oxide Whisker Incorporation on the Mechanical Properties of Composite Resin

Preparation and Characterization of Sodium Aluminum Silicate-Polymer Composites and Effects of Surface Roughness and Scratch Directions on Their Flexural Strengths

Effect of the Amount of Silane Coupling Agent γ-MPS on Properties of ZrO2-SiO2 Based Dental Resin Composites

Effect of whisker surface treatment on the mechanical properties of 20vol%SiCw/BAS glass-ceramic composites

Effect of siloxane quantity and ph of silane coupling agents and contact angle of resin bonding agent on bond durability of resin cements to machinable ceramic.

Effect of Silica Nanospheres Silanized by Functional Silanes on the Physicochemical and Mechanical Properties of Bis-GMA/TEGDMA Dental Composite Resin by Photocuring Synthesis