Abstract:Maintaining breathable air in human space flight missions is a challenge since there will be a gradual increase in the concentration of CO 2 due to the exhalation of the spacecraft crew. Modern air revitalization technology for space missions uses temperature swing adsorption with zeolite-based materials as the adsorbent. However, the major drawbacks of zeolites are difficulty in regenerating used adsorbent and low selectivity towards CO 2 . Besides, frequent replacement of adsorption beds is necessary because of their low adsorption capacity towards CO 2 . This requires carrying a few spare beds in the spacecraft, which is not preferred because of the low-weight requirements for space missions. Hence, shifting to alternate materials with more selectivity and adsorption capacity toward CO 2 becomes essential. Metal-organic frameworks (MOFs) are a class of crystalline materials found to be potential adsorbents for CO 2 capture. Due to their ultra-high porosity, tunable pore characteristics, selective capture, and synergistic performance, they could replace the existing zeolite-based adsorbents. Further enhancement in the adsorption capacity could be achieved by introducing a secondary metal into the framework. This will bring heterogeneity in the structure, creation of defects, and open metal sites, thus enhancing the adsorption behavior. Incorporating a secondary metal into the framework and an additional filler material like activated carbon, making a BMOF composite, would lead to an exemplary improvement in the adsorption activity. The addition of filler material will lead to an increase in pore volume, which will enhance the adsorption capacity. In the current work, activated carbon was synthesized from sawdust via chemical activation method using KOH as the activating agent. It was carried out at low temperatures to boost the porous structure formation. Then the composite of Cu-Ni bimetallic MOF with activated carbon was prepared through one-pot solvothermal synthesis. The incorporation of activated carbon created an additional number of pores in the system leading to enhanced adsorption. N 2 adsorption-desorption analysis was carried out to find the surface area. The results showed that the surface area of activated carbon and Cu-Ni-Activated carbon BMOF composite was found to be 576 m 2 /g and 1321 m 2 /g, respectively. The analysis also revealed the presence of microporous system in the material. Several characterization techniques, such as IR, SEM, XRD etc., were used to study morphology and characteristic features. The SEM shows that the incorporation of nickel and activated carbon have made a profound modification on the octahedral morphology of copper. CO 2 adsorption studies were carried out at 1 bar, 25°C. The BMOF composite adsorbent was found to adsorb ~4.52 mmol/g of CO 2 whereas the as-synthesized activated carbon and ZSM-5 were found to adsorb ~2.71 mmol/g and ~1.68 mmol/g respectively. To understand the level of microporosity in the supermicropores range, CO 2 adsorption analysis at 1 bar and 0°C was carried out since N 2 adsorption at -196°C have limitations due to kinetic diffusion related problems at low temperatures. It revealed a micropore volume (<1.066nm) of 0.252 cm 3 /g and a pore size range of 4-10 angstroms, which is ideal for selective CO 2 adsorption. Also, the BMOF composite was found to adsorb ~8.27 mmol/g at 0°C, which showed that adsorption capacity increases with a decrease in temperature. Hence, the BMOF composites could serve as a promising adsorbent for selective CO 2 capture. Figure 1

A multi-scale porous composite adsorbent with copper benzene-1,3,5-tricarboxylate coating on copper foam

Highly Efficient Adsorbent Design Using A Cu-Btc/Cuo/ Carbon Fiber Paper Composite For High Ch4/N-2 Selectivity

The Study for the Thermal Conductivity and Adsorption Separation of the Carbon Composite

Modification of Copper Benzene-1,3,5-tricarboxy Late (Cu-BTC) Composites with Multiwalled Carbon Nanotubes and Amino Groups for Enhanced CO2/CH4 Selective Adsorption Performance and Water Stability

Enhanced Thermal and Electrical Conductivity of Cu-BTC Metal Organic Framework with High CO2/H2 Selectivity by Composing with Carbon Fiber Paper

Experimental and Numerical Study of Co2 Adsorption on Copper Benzene-1,3,5-Tricarboxylate (Cu-Btc) Metal Organic Framework

Adsorption of Carbon Dioxide, Methane and Nitrogen on an Ultramicroporous Copper Metal-Organic Framework.

CO2 Adsorption of Metal Organic Framework Material Cu-BTC via Different Preparation Routes

Manipulating Oxidation States of Copper Within Cu-BTC Using Na2S2O3 As a New Strategy for Enhanced Adsorption of Sulfide

Synthesis, Characterization and Experimental Investigation of Cu-Btc As Co2 Adsorbent from Flue Gas

Synthesis of bimetallic–organic framework Cu/Co-BTC and the improved performance of thiophene adsorption

Synthesis, structure and gas adsorption properties of a stable microporous Cu-based metal–organic framework assembled from a T-shaped pyridyl dicarboxylate ligand

Investigation on cost-effective composites for CO2 adsorption from post-gasification residue and metal organic framework

Facile Synthesis of CuBTC and Its Graphene Oxide Composites As Efficient Adsorbents for CO2 Capture

Rational Design and Synthesis of a Highly Porous Copper-Based Interpenetrated Metal-Organic Framework for High CO2 and H2 Adsorption.

Highly efficient adsorbent design using a Cu-BTC/CuO/carbon fiber paper composite for high CH<sub>4</sub>/N<sub>2</sub> selectivity

Anion-regulated Selective Growth Ultrafine Copper Templates in Carbon Nanosheets Network Toward Highly Efficient Gas Capture.

Enhancing Selective Adsorption of CO2 Through Encapsulating FeTPPs into Cu-BTC

Bimetallic Metal Organic Framework Composites for Carbondioxide Capture

A Thermally and Chemically Stable Copper(II) Metal–Organic Framework with High Performance for Gas Adsorption and Separation

Metal–organic framework-driven copper/carbon polyhedron: synthesis, characterization and the role of copper in electrochemistry properties