Abstract:Cold Expansion (CE) techniques are extensively used in the aeronautical industry to enhance the fatigue life of open-hole plates. However, the availability of accurate Finite Element (FE) models to simulate the fatigue behavior of this process, particularly Dynamic Cold Expansion (DCE), is limited. This study introduces two novel methods for predicting the fatigue response of DCE and Static Cold Expansion (SCE) open-hole plates. The first method directly estimates the total fatigue life using Continuum Damage Mechanics (CDM) and the Theory of Critical Distance (TCD). The second method separates the prediction of fatigue crack initiation life and propagation life, incorporating CDM, TCD, and the Extended Finite Element Method (XFEM). Moreover, FE models are developed to simulate residual stress, stress under external cyclic loads , and fatigue crack propagation behavior for both DCE and SCE specimens. The proposed methods are evaluated, compared, and the mechanisms behind fatigue life enhancement and fatigue crack propagation modes in CE specimens are discussed. It is found that the prediction accuracy is enhanced by considering stress distributions along the thickness direction and improving the Line Method (LM) in TCD through the introduction of a novel CE parameter. The results demonstrate that both methods achieve good predictive performance , with an average error index within ±30%. Furthermore, it is observed that both DCE and SCE processes primarily improve the fatigue crack initiation life of open-hole plates, with the percentage of crack initiation fatigue life increasing as the expansion size increases. The majority of the fatigue crack propagation life in CE specimens is concentrated in the initial stages of crack propagation. In addition, the effects of DCE and SCE processes on reducing the fatigue crack propagation rate are more pronounced along the thickness direction compared to the width direction, leading to distinct crack propagation modes between CE and non-cold expansion (NCE) specimens.

High Temperature Strength and Multiaxial Fatigue Life Assessment of a Tubesheet Structure

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Low-Cycle Fatigue Damage of Circular Concrete-Filled-Tube Columns

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

Flexural fatigue behavior of butt-welded circular concrete-filled double skin steel tube (CFDST)：Experimental study and numerical modeling

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A CDM model for remaining fatigue-lifetime prediction of ductile metals

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Deformation and Damage Behavior of a 1Cr-Cast Steel Under Multiaxial Loading at Elevated Temperatures

Fatigue response of open hole plates: A finite element simulation investigating the influence of dynamic and static cold expansion processes

Experimental and Numerical Investigation of High-Temperature Multi-Axial Fatigue

Determination of relationship between high-temperature low cycle fatigue damage and mechanical property degradation: Experimental and theoretical analyses

A modified damage accumulation model for life prediction of aero‐engine materials under combined high and low cycle fatigue loading