Abstract:An experimental investigation on the influence of elevated temperatures on the thermal resistance, water absorption and microstructure of high-strength self-compacting lightweight aggregate concrete (HSSC-LWAC) is presented. In total, 315 concrete specimens from 7 different mixtures with different replacement ratios (0, 30 %, 50 % and 100 % by weight) of two kinds of LWAs, namely cloud concrete stone (CCS) and fly ash ceramsite (FAC), were prepared. The workability of fresh concrete mixtures including slump, J-Ring and T500 tests was first conducted aiming at meeting the requirements of self-compacting performance. Hardened concrete specimens were then exposed to different elevated temperatures (i.e. 200 degrees C, 400 degrees C, 600 degrees C and 800 degrees C) increased with a heating rate of 10 degrees C/min. A series of tests including the apparent morphology, ultrasound pulse velocity (UPV), residual compressive strength and capillary water absorption were carried out on unheated control concrete and after air-cooling period of heated concrete. Finally, the thermal analysis and microstructural observation were further conducted through the thermogravimetry (TG), differential scanning calorimetry (DSC), mercury intrusion porosimetry (MIP), laser scanning microscopy (LSM) and scanning electron microscope (SEM) to characterize the evolution of high temperature damage. Generally, the high temperature resistance of HSSCLWAC shows an increasing trend as the LWAs content increases, while the residual mechanical strength increases and then decreases with an increase of the temperature gradient. The microstructural observation indicates that the evolution behavior of thermal damage promotes the continuous development of micropores in the interfacial transition zones (ITZ) to form wider microcracks, resulting in the degradation of residual mechanical properties.

Experimental Research on High Temperature Resistance of Modified Lightweight Concrete after Exposure to Elevated Temperatures

Compressive Properties and Microstructure of Modified Lightweight Aggregate Concrete after Exposure to Elevated Temperatures

Behaviour of Modified Lightweight Aggregate Concrete after Exposure to Elevated Temperatures

Performance of Modified Lightweight Aggregate Concrete after Exposure to High Temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES

Thermal Resistance, Water Absorption and Microstructure of High-Strength Self-Compacting Lightweight Aggregate Concrete (HSSC-LWAC) after Exposure to Elevated Temperatures

Performance Degradation and Microscopic Analysis of Lightweight Aggregate Concrete after Exposure to High Temperature

Experimental research on impact-resistant capacity of concrete filled steel tube under high temperature

A state-of-the-art review on high temperature resistance of lightweight aggregate high-strength concrete

Performance of Different Concrete Types Exposed to Elevated Temperatures: A Review

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Mechanical properties of concrete at high temperature—A review

Experimental assessment of explosive spalling in normal weight concrete panels under high intensity thermal exposure

A review of high temperature properties of cement based composites: Effects of nano materials

Research on Fire Resistance of Ultra-High-Performance Concrete

Effect of micro‐structural changes on concrete properties at elevated temperature: Current knowledge and outlook

Repeated Impact Response of Normal- and High-Strength Concrete Subjected to Temperatures up to 600 °C

Effects of Elevated Temperature on the Residual Behavior of Concrete Containing Marble Dust and Foundry Sand

Microstructure and Mechanical Properties of High-Toughness Fiber-Reinforced Cementitious Composites after Exposure to Elevated Temperatures