Abstract:Ultra-high performance concrete (UHPC) tends to crack and flake at high temperature, which causes the structure to lose its overall stability and collapse, posing a serious threat to people's lives and property safety. In this study, by selecting the cementitious material and the high-temperature resistant aggregate, a new type of high-temperature resistant ultra-high performance concrete (HTR-UHPC) was successfully developed. The high temperature resistance tests of HTR-UHPC were systematically carried out at 5 different temperatures (20 °C, 250 °C, 500 °C, 750 °C, 1000 °C). The compressive and axial tensile properties of the specimens were investigated after high temperatures, and the compressive and tensile stress–strain curves were obtained. High-temperature products and internal structures were tested by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively, and the microscopic mechanisms were revealed. The results showed that the mechanical properties of the HTR-UHPC had been significantly improved after heating at 500 °C, 750 °C, and 1000 °C. When heated to 500 °C, the compressive and tensile strength of HTR-UHPC retained 106 and 88% of the unheated status, respectively. While the structure of traditional UHPC was damaged, the compressive and tensile strength retained only 90 and 76%. Moreover, when heated to 750 °C, the HTR-UHPC still maintained structural integrity. The residual compressive and tensile strength could still reach 115.83 and 6.17 MPa. During the hydration process, the HTR-UHPC did not generate calcium hydroxide, and the failure stress caused by high-temperature dehydration was small. At the same time, the ability of late crystal transition to reduce strength was suppressed by the addition of mineral admixtures, which enabled the formation of cracks and pores to be effectively suppressed. The stability and mechanical properties of the structure were maintained. Overall, these findings offer valuable insights into the influence of cementitious material system and high-temperature resistant aggregate on the mechanical properties of HTR-UHPC.

A state-of-the-art review on high temperature resistance of lightweight aggregate high-strength concrete

Thermal Resistance, Water Absorption and Microstructure of High-Strength Self-Compacting Lightweight Aggregate Concrete (HSSC-LWAC) after Exposure to Elevated Temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

Experimental Research on High Temperature Resistance of Modified Lightweight Concrete after Exposure to Elevated Temperatures

Performance Degradation and Microscopic Analysis of Lightweight Aggregate Concrete after Exposure to High Temperature

Compressive Properties and Microstructure of Modified Lightweight Aggregate Concrete after Exposure to Elevated Temperatures

Mechanical properties of concrete at high temperature—A review

Mechanical and Microstructural Properties of Ultra-High Performance Concrete with Lightweight Aggregates

Physical, Mechanical, and Microstructure Characteristics of Ultra-High-Performance Concrete Containing Lightweight Aggregates

Behaviour of alkali-activated concrete at elevated temperatures: A critical review

Performance of Modified Lightweight Aggregate Concrete after Exposure to High Temperatures

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Performance of Different Concrete Types Exposed to Elevated Temperatures: A Review

Feasibility of Waste Foundry Sand in High-Strength Self-Compacting Concrete and the Effects of Elevated Temperatures

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete

Mechanical properties and microstructure of ultra-high strength concrete with lightweight aggregate

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Behaviour of Modified Lightweight Aggregate Concrete after Exposure to Elevated Temperatures