Abstract:TiAl intermetallic compounds, as a new kind of high-performance light-weight structural material, are widely applied in many fields. Titanium carbide (TiC) as the reinforcing phase could improve the mechanical properties, wear resistance, and heat-resistance stability of TiAl intermetallic compounds. Ti(Al, C) mixture powders were deposited by cold spraying at gas temperature of 250 °C, 450 °C, and 550 °C. Then, Ti(Al, C) coatings were annealed at temperatures of 650 °C for different times and following holding at 1100 °C for 3 h. The microstructure, microhardness, fracture toughness, and abrasive wear of Ti-Al composite coatings were investigated. The research results were that the particle size of mixture powders decreased as the ball milling time prolonging. Ti(Al) solid solution appeared in the mixture powders as the milling time increased to 30 h. The average porosity of the coating sprayed at 550 °C was the lowest (0.85%). The as-sprayed coatings exhibited the same phase compositions with the mixture powders. The coating sprayed at gas temperature of 550 °C has the highest microhardness and the lowest weight loss. Ti-Al intermetallic was in-situ synthesized after annealing at 650 °C. The average porosity of the annealed coating (sprayed at 450 °C) was the lowest. The content of Ti-Al intermetallic compounds of the annealed coating sprayed at 450 °C is the highest. The X-ray diffraction (XRD) analysis results are consistent with the EDS analysis of the annealed coatings after annealing at 650 °C. Ti-Al intermetallic compounds were almost completely formed in the three kinds of the coatings after annealing at 650 °C for 20 h and following holding at 1100 °C for 3 h. TiAl and TiAl3 intermetallic phases were in-situ synthesized in the coatings based on the energy dispersive spectroscopy (EDS) and XRD analysis. TiC was also in situ synthesized in the coatings as the annealing temperature increased to 1100 °C. The annealed coating (sprayed at 450 °C) has the highest microhardness, fracture toughness, and wear resistance properties after annealing at 1100 °C for 3 h.

Influence of Thermal Annealing on the Microstructure, Hardness and Corrosion Behavior of Tialsicun Nanocomposite Films

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Influence of annealing on microstructures and mechanical properties of arc-deposited AlCrTiSiN coating

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Influence of annealing temperature on microstructure evolution of TiAlSiN coating and its tribological behavior against Ti6Al4V alloys

Effects of annealing temperature on the microstructure, mechanical and tribological properties of CrAlTiN coatings

Microstructure, Microhardness, Fracture Toughness, and Abrasive Wear of In-Situ Synthesized TiC/Ti-Al Composite Coatings by Cold Spraying Combined with Heat Treatment

Effect of annealing on the microstructure, mechanical and electrochemical properties of CrAlC coatings

Influence of annealing temperature on the structure and properties of Ti3AlC2 coatings by FCVA method

Improving hardness and toughness of plasma sprayed Ti–Si–C nano-composite coatings by post Ar-annealing

Improving the mechanical and tribological properties of TiAlSiN coatings by annealing

Post-deposition annealing effects on microstructure, mechanical and tribological properties of AlCrN films

Effect of annealing temperature on microstructure and tensile properties of copper/aluminum composite thin strip

Effects of Al Addition and Annealing on Microstructure and Properties of Ni-Ti Coatings Synthesized on SUS 316L Stainless Steel Substrates Using Mechanical Alloying Method

Fractography, microstructure and thermal stability of multilayer CN x/TiN composite films prepared by DC reactive magnetron sputtering

Effect of Carbon and Heat Treatment on the Microstructure and Properties of VAlTiCrSi High-Entropy Alloy Films

Microstructure, corrosion resistance and biocompatibility of titanium incorporated amorphous carbon nitride films

Annealing Behavior and Hardness Enhancement of Amorphous Sicn Thin Films

Microstructural evolution during annealing of a powder metallurgical TiAl–Nb composite and its effect on mechanical properties

Effect of Annealing Temperature on As-Cast Ti6Al4V–5Cu Alloy Microstructure, Tensile Properties, and Fracture Toughness

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings