Abstract:This work makes use of experimental and numerical studies to investigate the reduction of braking noise and vibrations of brake disks by introducing various M-shaped grooves on the brake disk frictional surfaces. Experiments with a brake test dynamometer have been carried out to compare the braking vibrations and noise of the grooved disks with that of the un-grooved disk. The experimental results demonstrate that disks with grooves significantly reduced braking vibrations and noise at both low and high frequencies, and as the initial braking temperature and braking pressure increased, the reduction effect is further enhanced. The investigation also shows the wear rates of both the grooved disks and brake pads are also significantly reduced. Thermo-mechanical coupled finite element models of the brake pads and disks with and without grooves are developed to investigate the mechanisms of the reduction of braking noise and vibrations by the introduction of grooves on the disk frictional surfaces. The numerical results show that the number of grooves plays an important role in reducing the interface surface temperatures, enhancing heat flux, reducing thermal deformation, changing the contact pressure distribution, and stabilizing the coefficients of friction of the braking sliding contacts. The thermal effects contribute to the wear reduction of both the braking disks and pads, and the reduction of braking noise and vibrations. In addition, both the finite element modal analysis and the experimental modal testing results show that surface grooves increase the modal damping ratio of the disks, which certainly plays a role on the reduction of braking noise and vibrations. This study has significance to the surface modification of brake disks in order to reduce braking noise and vibrations, as well as the wear resistance of brake disks and pads.

Research of Noise Mechanism and Performance Improve of DVC Drum

Investigation of Noise Characteristics of Electric Vibrator Utilizing Acoustic Camera and Transfer Path Analysis

Analytical Model for Predicting Maximum Reduction Levels of Vibration and Noise in Switched Reluctance Machine by Active Vibration Cancellation

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Experimental Analysis on Noise and Vibration of Electric Drive System Focusing on Order Contribution Ratio

Improvement of Drum Loose Dampening Feeder

Research Status on Frictional Vibration and Noise of Mechanical Brake

The Vibration and Modal Analysis of the Disc Brake

Application of Particle Damping for Vibration Attenuation in Brake Drum

Noise and vibration performance of automotive disk brakes with laser-machined M-shaped grooves

A Study on Chattering Noise of Automobile Disc Brake

A Research on Improving the NVH Performance of Flywheel Cover

Vibration Characteristics and Optimization of Variable Cross-Section Cylindrical Shell Structure under Multi-Point Excitation

Analysis and Optimization of Level-I Vibration Absorption of Single Drum Vibratory Roller

Experimental Investigation and Analysis on Dynamic Strain of Leading Trailing Shoe Drum Brake

Characteristics and mechanism of friction noise and vibration of disk brake under DC magnetic field

Robust design for reducing drum brake noise

Research on the Influence of Disc–Drum Connection Bolt Preloading Rotor Assembly Modal Characteristics and Diagnosis Technology

On Drum Brake Squeal—Assessment of Damping Measures by Time Series Data Analysis of Dynamometer Tests and Complex Eigenvalue Analyses

Vibration Noise Analysis of Transmission Based on Explicit Dynamics

Design Of A Vibration And Noise Testing System Of Rolling Bearings