Abstract:Modelling of disc in brake squeal analysis is complicated because of the rotation of disc and the sliding contact between disc and pads. Many analytical or analytical numerical combined modeling methods have been developed considering the disc brake vibration and squeal as a moving load problem. Yet in the most common used complex eigenvalue analysis method, the moving load nature normally has been ignored. In this paper, a new modelling method for rotating disc from the point of view of modal is presented. First finite element model of stationary disc is built and modal parameters are calculated. Then the dynamic response of rotating disc which is excited and observed at spatial fixed positions is studied. The frequency response function is derived through space and time transformations. The equivalent modal parameter is extracted and expressed as the function of rotation speed and original stationary status modal parameters. Because of rotating, each mode of the disc split to two complex modes. Finally, response of rotating disc under fixed constant force is studied using the presented equivalent modal parameters. It shows that the response consists of a static response and two travelling waves with frequencies differ from the stationary modal frequency.

The Vibration and Modal Analysis of the Disc Brake

Modal Analysis of the Key Parts in a Disc Brake

Research on dynamic characteristics of disc brake

Analysis of Real Modal of brake parts Oriented Brake Noise

Experimental Investigation into Friction- Vibration Coupling Characteristics of Vehicle Disc Brake

Modal Study on Disk Brake Pad of New-Style Composite Friction Material

Theoretical Modeling and FEA of Thermo-mechanical Coupling Dynamics of Ventilated Disc Brake

Vibration Characteristic Analysis and Collaborative Optimization Design for the Disk Brake

Brake noise oriented complex modal analysis of disc brake with FEM

Computational Analysis of Impact of Rotor Elastic Modulus on Disc Brake Squeal

Modal Analysis of Brake Disc and Its Application to Production-line Inspection System

Braking noise study on disc typed brake based on finite element method

Complex modal analysis model for frictional squeal of an automotive drum brake and its affect factors

Complex Modal Analysis On A Disc Brake With Thermal Deformation And Rough Surfaces

Simulation analysis for effect of pad lining arc on disc brake squeal

Friction-induced vibration and noise on a brake system

Finite Element Analysis and Testing on Disc Brake Squeal

Simulation Analysis on the Thermal Distortion and its Influencing Factors of Brake Disc

Analysis of Rotor Geometry Specifications to Structural Modal Characteristics Modification of Vehicle Brake Disc

Vibration Energy and Repeated-Root Modes of Disc Rotor for High-Frequency Brake Squeal

Modal Based Rotating Disc Model for Disc Brake Squeal