Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Numerical simulation on concrete target penetrated by warhead of different titanium alloy shaped charge

Spallation Affected Fracture Pattern of a Titanium Alloy Plate Subjected to Linear Shaped Charge Jet Penetration

Numerical Simulation on Shaped Charge Jet Penetrating Single / Composite Structure of Target Plate

Numerical Simulation of Rigid Projectiles Penetration into Concrete Targets with Different Warhead Shapes

Penetration and Cratering of Steel Target by Jets from Titanium Alloy Shaped Charge Liners

Experimental and numerical studies on penetration of shaped charge into concrete and pebble layered targets

Study on Penetration Behavior of the Reactive Material Composite Jet against Concrete

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Study on Target Structure Equivalent of Kinetic Energy Projectile Penetrating Concrete Target

Formation and Penetration Properties of a Shaped Charge with Zr41.2Ti13.8Cu12.5Ni10Be22.5 Liner

The Influence of Closed-Cell W-Shaped Liner Parameters on the Penetration Performance of Integral Annular Shaped Charge

Numerical Simulation of Penetration in Concrete Sheet Based on SPH Method

Three-dimensional numerical simulation of projectile penetration into concrete and steel fiber reinforced concrete

Experimental and 3D Mesoscopic Numerical Simulation Study of Kinetic Projectile Penetrating into Concrete

Thick Plain Concrete Targets Subjected to High Speed Penetration of 30crmnsini2a Steel Projectiles: Tests and Analyses

Resistance of composite target against combined effects of large caliber projectile penetration and successive charge explosion

Numerical Simulation Of High-Speed Projectile Oblique Penetration Into The Concrete Target

Penetration trajectory of rigid projectile in the heterogeneous meso-scale concrete target

Numerical Simulation and Analysis of Shelled Explosive Penetrated but Not Detonated

Numerical Simulation and Analysis of a Combined Shaped Charge

Penetration Analysis of Driving Weapons Precursory Shaped Charge Based on LS-DYNA