The Design of How to Access 1394 Devices Through USB Interfaces

杨登峰,冯志华,张平,李龙雨

DOI: https://doi.org/10.3969/j.issn.1000-7180.2004.06.011

2004-01-01

Abstract:This paper introduces the theory of how to transfer data packet between USB interface and 1394 interfaces, and how to convert the data format from 1394 to USB.

What problem does this paper attempt to address?

Research on USB Data Transmission Technology Based on LabVIEW

程龙飞,何闻

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.07.036

2009-01-01

Abstract:The USB data transmission technology based on LabVIEW was studied.The USB interface circuit which core chip is PDIUSBD12 produced by PHILIPS,the firmware programming method of the USB interface circuit,and the specific method of compiling application which is based on the LabVIEW were introduced.The result in the data transmission test shows that it can realize the data transmission between superior monitor and inferior computer by using LabVIEW and USB interface.
Design of Data Communication Interface of Data Acquirement System Based on USB

陈章位,赵玉刚

DOI: https://doi.org/10.3321/j.issn:1004-132X.2004.20.014

2004-01-01

Abstract:An interface based on USB is designed for Data Acquirement System with DSP chips. Cypress EZ-USB technology and FPGA technology were used in this interface. This kind of interface can achieve high speed data communication between the Data Acquirement System and the PC in the USB 1.1 protocol, and it can meet the requirements of high speed and real-time requirements.
Real-time Bidirectional Data Transmission Based on USB Interface

Kuang Wang

2005-01-01

Abstract:The article designs a real-time bidirectional transmission channel.And it introduces the theory of the design,selects specific chip,introduces the hardware of the channel,and brings forward the method of designing USB firmware,driver,and application.
Design and Realization of Low Cost USB Protocol Converter

杨章顺,冉立新

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.18.069

2004-01-01

Abstract:USB has become popular due to its high speed, plug and play feature and the capability to avoid resource conflict. An embedded converter from other low speed bus to USB is very interesting, since it would allow legacy peripheral devices to experience USB advantages without major changes. The paper presents a universal USB1.1 protocol converting scheme, and an example of PS/2-USB converter is also given.
Performance Analysis of High-Speed Digital Interface USB and IEEE 1394

Yang LI,Jian-hua ZOU

DOI: https://doi.org/10.3969/j.issn.1002-8684.2001.01.012

2001-01-01

Abstract:The basic features of Universal Serial BusUSB and IEEE 1394 are analyzed and compared in this paper and the foreground of the two interfaces are described.
The Design of a Data Acquisition System Based on USB

DAI Hai-feng,FU Cui-yu

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.04.012

2006-01-01

Abstract:This paper presents the design of a data acquisition system based on the USB interface,which has its rational hardware structure and corresponding software.This system has been put into operation,which has produced a wonderful effect.
Designs of USB2.0 interface of data acquisition card

Qiao Liyan,Wu Jiangwei,Xu Hongwei

DOI: https://doi.org/10.3969/j.issn.1002-7300.2010.01.017

2010-01-01

Abstract:Data acquisition has been widely used in industrial production.Based on summarization of the hardware architecture,the thesis gives a detailed description of the design of USB interface,including the hardware design of USB2.0,The interface logic design in FPGA,USB firmware design,USB driver program design,and the application design.Through the experimental test,the result proves the design meets the accuracy and application objective expected,the data transporting rate is up to 20MB/s.
Design and Implementation of Infrared Data Transmission System Based on USB 2.0

张君怡,王海明,裴东兴

DOI: https://doi.org/10.3969/j.issn.1674-6236.2009.12.018

2009-01-01

Abstract:In order to overcome the deficiency or defect of wire transmission and avoid damaging the measurement equipment because of frequent pluging and drawing,the infrared data transmission system based on USB2.0 are designed in the paper.The overall structure and design and implementation of key hardware are described in detail,and the design of firmware,driver program and application program are also expatiated.It utilizes USB2.0 technology and infrared transmission technology to realize the wireless data transmit between measurement equipment and PC.
Design and Implementation of USB Communication for Intelligent Instrument

殷冬冬,程健,晋荣

DOI: https://doi.org/10.3969/j.issn.1001-9944.2010.08.011

2010-01-01

Abstract:As langmuir probe measurement system for application background,this paper puts forward and implements USB communication between master and slave devices.It introduces the system structure and hardware design briefly,and expatiates a universal design method of USB firmware program for ARM micro processor and USB driver in Win-dows environment.Moreover,it also devised a suit of interactive protocol for the communication between master and slave device.This design has already been applied in langmuir probe measurement system and is very useful for ap-plying USB technology in intelligent instrument.
Realization of High-speed Data Transmission Based on USB Interface

吕超,张玉霞,王立欣

2009-01-01

Abstract:USB interface has the advantage of plug-and-play, easy to install, high-bandwidth, easy to expand and high-speed transmission. Despite the USB2.0 specification has reached the highest transmission speed of 60MB/s, but a lot of USB 2.0 devices actually worked in the data transmission quite different from it. The data acquisition system has been designed with FPGA as a central controller and CY7C68013 as a interface in this paper. When the interface chip CY7C68013 work at Synchronization slave FIFO mode, a block synchronization signal is designed to ensure the stability and highest transmission. The highest data transfers speed of the system is 31.8MB/s.
Design of the IEEE-1394 Based System for Video Transmission

HUO XiaoXin,LIU XiangYang,ZHU Peisheng

2009-01-01

Abstract:In combination with the requirements of high capacitance information transmission of Avionics System,taking advantage of IEEE-1394b serial bus high-speed transmission characteristics,the paper designs a high-speed video transmission system based on IEEE-1394b serial bus.And it focuses on the overall design ideas and methods of the system,including design of main circuit.Experiment shows that the system successfully realizes the transmission of airborne video data.The system hardware is easy to be realized,process rate is fast,and has high speed of transmission.
Research and Discussion on High Speed Data Transmission of USB2.0

LIU Si-jiu,ZHAO Wei

DOI: https://doi.org/10.3321/j.issn:1002-8331.2007.02.021

2007-01-01

Computer Engineering and Applications Journal

Abstract:Based on the problems in the application of the high speed data transmission with USB2.0,the paper analyzed the reasons which affect the speed such as protocol overhead,bandwidth distribution,the host pc's software and hardware,device driver program and so on.The paper also introduces the endpoint FIFO pipe and GPIF.Furthermore,some experiments for data transmission in different mode have been done with USB2.0 device using EZ-USB FX2.Then some strategies are brought forward which can solve the high speed data transmission in the summary.
Host USB Interface Design for Vehicle Travelling Data Recorder

龚宗洋,张为公,于兵

DOI: https://doi.org/10.3969/j.issn.1000-8829.2009.02.025

2009-01-01

Abstract:The slave USB interface in vehicle travelling data recorder is a deficient way to exchange data between recorder and PC.A host USB design compatible to the vehicle travelling data recorder(GB/T19056-2003) is demonstrated,and how to configured the SL811 as a host USB controller and the realization of accessing the USB disk through FAT file system are introduced.A good means for exchanging data between PC and the vehicle travelling data recorder is given.
Design and Implementation of Data Uni-directional Transmission System Based on EZ-USB FX2

LI Bo,LIU Jia-yong,JIANG Yu,LIU Xian-kui

DOI: https://doi.org/10.3969/j.issn.1672-2892.2008.01.011

2008-01-01

Abstract:To satisfy the application requirements for host-computers uni-directional data trans- mission in different security ratings, a design scheme of uni-directional transmission system based on EZ-USB FX2 is presented in this paper. And the system which adopts the Universal Serial Bus(USB)2.0 chip Cy7c68013 and IDT72v06 First in First out(FIFO) memory, realizes uni-directional, high-speed, safe and reliable data transmission between the host-computers in different security domains, with hardware design of external FIFO through General Programmable Interface(GPIF) and application program.
Design of Data Transmission System Based on FPGA and USB 2.0

Junsheng Wu,Fuzhou Shang,He Sun,Tian Qin,Qing Li

DOI: https://doi.org/10.4028/www.scientific.net/amm.321-324.417

2013-01-01

Applied Mechanics and Materials

Abstract:In this paper, a high-speed data transmission system based on FPGA (Field Programmable Gate Array) and USB 2.0 (Universal Serial Bus) technology is designed. Firstly, we introduce the hardware of the data transmission system, which includes data acquisition circuit, transmission circuit and power conversion circuit, etc. Secondly, the corresponding software design including USB firmware program, USB driver and firmware modification are described in detail. Finally, the corresponding experiment has been carried out, which show that the developed system will help to achieve the data transmission system with the characteristics of high-speed, integration and low power consumption, etc.
Analysis of USB Host Technology and Its Application Design

LIU Ming-zhu

DOI: https://doi.org/10.3969/j.issn.1009-671x.2005.08.008

2005-01-01

Abstract:Universal serial bus is a new interface bus architecture for PC, which supports the PnP function of PC's peripheral equipments and has been widely used in computer and communicational devices. To realize the PnP function of intelligent instruments and the high integration of the whole system, USB technology is adopted.This paper probes into the core technique of USB Host, and discusses the feasibility of applying USB technique to intelligent instruments.
Research on Real-Time USB Driver Based on Linux Operating System

WANG Yi-hua,HUANG Dao-ping,LIU Shao-jun

DOI: https://doi.org/10.3969/j.issn.1001-2265.2011.01.021

2011-01-01

Abstract:In high-speed data acquisition systems and high-speed and high-accuracy numerical control systems,two important factors that may influence the performance of the systems are real-time capability and data transferring interfaces that connect systems.The standard Universal Serial Bus(USB),which has many advantages(including the advantage of data transferring) over other buses,is the dominating bus that is currently widely used.The paper focuses on discussing the realization of the realtime USB driver.Firstly,the structure of the USB subsystem in Linux operating system is introduced.Secondly,the realization of the realtime USB driver is discussed in detail.Finally,the performance of the USB driver is tested through a specified program.As is shown by the result,the realtime USB driver performs well and can meet the requirements of many highspeed data acquisition systems.The research work of the real-time USB driver presents brilliant application prospect and great practical value.
The USB Technology in Intelligent Instruments

Ming-zhu LIU,Qi YU,Jian-wei HUANG

DOI: https://doi.org/10.3969/j.issn.1003-7241.2005.04.022

2005-01-01

Abstract:Universal Serial Bus is a new type of interface bus for PC. It is widely applied to computer and communicational devices. The protocol of USB Host Controller is analysed and the application of USB technique to intelligent instruments are introduced.An example is given to illustrate the design process for intelligent instruments.
Design of IEEE 1394b Bus Link-layer Controller

Shuai Yang

2015-01-01

International Journal of Research Studies in Computer Science and Engineering

Abstract:Abstract: The IEEE 1394 bus has advantages such as high transmission speed, long transmission distance, plug and play, supporting variable transmission modes and so on. This essay mainly focuses on study link layer in the bus protocol and data transfer in asynchronous and isochronous mode, design the control chip for IEEE 1394b link layer, implements the design on RTL-level programming and verify the design through software simulation. Main work completed consists of: analyzes the protocol structure of link layer, physical layer of IEEE 1394b bus, defines the link layer control chip’s function and system structure divided into modules. Implement the design of modules with RTL programming and simulates the design in software.
Design and Implementation of the High-Performance Link Layer in High-Speed Serial Communication

Yong-jian TANG,Le-nian HE,Xiao-lang YAN

DOI: https://doi.org/10.3969/j.issn.1000-7180.2005.04.037

2005-01-01

Abstract:The USB2.0 supports the high-speed signaling at 480 Mbps. It can meet the needs of image and voice signal transmitting. In this paper, after demonstration of the characters and functions of high speed digital circuit of USB2.0 link layer, a novel design and implementation method of data recovery circuits, which is based on all digital phase-looked loop (ADPLL), for the full-speed mode, as well as a new approach of parallel implementation of the encode/decode module in high-speed mode were proposed. The simulation results indicated that the circuit has reached 480MHz. A FPGA hardware simulation system was developed, in which the functions of link layer was verified.

The Design of How to Access 1394 Devices Through USB Interfaces

Research on USB Data Transmission Technology Based on LabVIEW

Design of Data Communication Interface of Data Acquirement System Based on USB

Real-time Bidirectional Data Transmission Based on USB Interface

Design and Realization of Low Cost USB Protocol Converter

Performance Analysis of High-Speed Digital Interface USB and IEEE 1394

The Design of a Data Acquisition System Based on USB

Designs of USB2.0 interface of data acquisition card

Design and Implementation of Infrared Data Transmission System Based on USB 2.0

Design and Implementation of USB Communication for Intelligent Instrument

Realization of High-speed Data Transmission Based on USB Interface

Design of the IEEE-1394 Based System for Video Transmission

Research and Discussion on High Speed Data Transmission of USB2.0

Host USB Interface Design for Vehicle Travelling Data Recorder

Design and Implementation of Data Uni-directional Transmission System Based on EZ-USB FX2

Design of Data Transmission System Based on FPGA and USB 2.0

Analysis of USB Host Technology and Its Application Design

Research on Real-Time USB Driver Based on Linux Operating System

The USB Technology in Intelligent Instruments

Design of IEEE 1394b Bus Link-layer Controller

Design and Implementation of the High-Performance Link Layer in High-Speed Serial Communication