Frequency Self-Tracking in Ultrasonic Welding Power

张尧,吴丰顺,鲁中良,张金松,王磊

DOI: https://doi.org/10.3969/j.issn.1001-2303.2003.08.010

2003-01-01

Abstract:Through the simple introduction of the frequency characteristics of sound system in ultrasonic welding,some main modes of self-tracking in ultrasonic power are illuminated,and its development direction is pointed out.

What problem does this paper attempt to address?

Implementing Ultrasonic Guided Wave Mode Control in Hollow Cylinders

Xiaowei Zhang,Zhifeng Tang,Sujun Luo,Fuzai Lv,Ye Han

DOI: https://doi.org/10.1109/fendt.2015.7398315

2015-01-01

Abstract:Ultrasonic guided waves have been successfully applied in Non-Destructive Evaluation (NDE) and Structural Health Monitoring (SHM) of pipelines of various industries. Guided waves are complicated because of their dispersive nature and infinite number of propagating modes. Mode control is of great significance for application of guided waves. The classical Normal Mode Expansion (NME) method is adopted to analyze guided wave mode control in hollow cylinders by using time delay axial array transducers and time delay circular array transducers. Guided wave mode control can be implemented when the axial array transducers and circular array transducers are specially designed. The theoretical prediction is verified by finite element numerical evaluation.
Automatic Frequency Tracking Based on Self-Optimizing Fuzzy-Control Approach

曹群,周兆英,罗晓宁,张毓笠

DOI: https://doi.org/10.3969/j.issn.1000-310x.2003.01.005

IF: 3.614

2003-01-01

Applied Acoustics

Abstract:The principle of automatic frequency tracking for the power ultrasonic vibration system is summarized. A self-optimizing fuzzy control approach is presented through the analysis of the self-optimizing control approach together with the fuzzy control method. The function of automatic frequency tracking is implemented. Experiment with an ultrasonic aspirator is carried out with a desired result.
Frequency tracking system for ultrasonic motor based on PLL circuit

SUN Zhong-ji,GUO Ji-feng

DOI: https://doi.org/10.3969/j.issn.1001-4551.2008.05.018

2008-01-01

Abstract:As running,the resonant frequency of ultrasonic motor will drift,which then leads to the decrease of speed and the decline of efficiency.For realizing the function of frequency tracking in driving power,the fundamental of frequency tracking based on keeping voltage-current phase difference unchanged was expounded,and the frequency tracking system for ultrasoinc motor was realized with phase-locked loop(PLL) CD4046.In conclusion,experimental results prove that the method is feasible.
Frequency Tracking Technology of Ultrasonic Motor Based on Phase-Locked Loop

GAN Yun-hua,JIN Long,HU Min-qiang,GUO Ji-feng,QU Jian-jun

DOI: https://doi.org/10.3969/j.issn.1007-2683.2009.02.018

2009-01-01

Abstract:Phase difference between voltage and current is called impedance phase characteristic which reflects stator's resonance characteristic of ultrasonic motor(USM).Closed loop control of USM is realized in using phase-locked loop through gathering phase difference signal between voltage and current.Using this method there's no need to set isolated pole.By experiments it is proved that the infection of temperature change to USM can be compensated by tracking phase difference,which makes motor run on initial setting point.When setting value is changed,the circuit can follow up phase diversification,making motor run steadily.
A Adaptive Frequency Tracking Control Strategy for Ultrasonic Motor Using the Driving Voltage

WANG Wenhao,GUO Jifeng,HU Xixing,ZHOU Weihua

DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2010.27.007

2010-01-01

Abstract:The resonant frequency of the ultrasonic motor drifts during motor operating as the temperature rising.The frequency drifting has a great effect on the output performance of the motor,such as speed,efficiency.So the function of frequency tracking is needed in the driving circuit.The relation between input voltage and frequency was analyzed using the equivalent circuit,then the effect of the temperature and load on dynamic impedance,resonant frequency,driving voltage and the speed were analyzed by experiment respectively.A new frequency tracking control strategy with driving voltage was advanced based on the control of input voltage.At last,a 60mm diameter traveling-wave ultrasonic motor was tested in this research,The speed fluctuation was tested below 5.1%,6.3%,6.4%,the efficiency of the motor increases about 0.88%,5.3% and 3.1% under no-load,light-load and heavy-loads respectively.
An Improved Frequency Tracking Strategy in Ultrasonic Transducer

Lang-te Xu,Ming Yang,Shi-yang Li,Xiao-qi Zhuang,Tian-yue Yang,Mike Zhou

DOI: https://doi.org/10.1109/spawda.2016.7829950

2016-01-01

Abstract:The realization of automatic frequency tracking is of great significance in ultrasonic transducer due to its wide application area in nowadays industrial manufacture. However, excessive overshoot current, serious overheating and long response time remain the urgent issue. To tackle these existing ultrasonic frequency tracking problem, this paper proposes a hybrid technique that integrates fuzzy control theory with PID control on the system. The technique involves coarse adjustment by fuzzy control and accurate adjustment by PID. Then, direct digital synthesizer (DDS) is used to generate required PWM wave with high accuracy. Initial driving frequency of the system and its corresponding phase difference of the feedback voltage and current can both be acquired during sweep frequency test before the tracking process, which corresponds to the parallel resonant point where the current is the minimum. This phase difference is also regarded as the target tracking value. During the tracking process, fuzzy control will be adopted when phase difference value error between feedback value and target value is greater than 10%, or PID will be used. Current difference AI and change rate AI/Af are used as two input values while driving frequency is the output value in fuzzy control when coarse adjustment is needed. Incremental PID arithmetic is used when accurate adjustment is needed. The result shows that the technique can reduce overshoot current of the ultrasonic transducer by approximately 8%, shorten the time for achieving stabilization of the system by 12%. In conclusion, this novel hybrid technique can quickly and stably track the frequency of parallel resonant point of the ultrasonic transducer system, meanwhile keep the whole system operating more efficiency and stable.
Research and Design of Ultrasonic Power for Ceramic Grinding

Jinkun Zhang,Youxin Li,Yongjun Zhang,Zhen Yao,Wei Chen

DOI: https://doi.org/10.3969/j.issn.1009-279X.2015.03.015

2015-01-01

Abstract:To solve the frequency drift problem during the ultrasonic machining power system operation,a composite frequency tracking method that based on STM32 combines current sweeping and phase detection was proposed. The sweeping ensures the accuracy of frequency tracking in a wide frequency range and the phase detection ensures the rapidity of frequency tracking. On this basis ,the corresponding control algorithm and circuit system were designed. By ceramic grinding experiments ,it shows that the power system has good frequency tracking characters.
A Fast and Accurate Frequency Tracking Method for Ultrasonic Cutting System Via the Synergetic Control of Phase and Current.

Jianfu Zhang,Ke Ma,Jianjian Wang,Pingfa Feng,Shahzad Ahmad

DOI: https://doi.org/10.1109/tuffc.2021.3137391

2022-01-01

Abstract:Ultrasonic cutting is a superior machining process for brittle materials, owing to its capability to reduce the cutting force and improve the surface quality. To avoid the destructive instability of ultrasonic vibration induced by the cutting force, the excitation frequency of the ultrasonic system must reliably track its resonance frequency. However, it remains challenging for the conventional frequency tracking methods via one parameter to simultaneously achieve both high response rate and high tracking accuracy. This study proposes that more than one parameter could be coupled to get advantages from each parameter. A frequency tracking method via the synergetic control of circuit phase and current of the ultrasonic system was proposed as an example. This method utilizes the phase to responsively determine the tracking direction and uses the characteristic current as the endpoint frequency to ensure accuracy. Theoretical analyses and numerical simulations were conducted to demonstrate that the proposed method can accurately track the frequency of maximum vibration amplitude with a higher response rate than conventional methods. Moreover, ultrasonic cutting tests were performed on Nomex composites to evaluate the machining performance of the ultrasonic system with the proposed method. The experimental results verify that the proposed frequency tracking method enables the ultrasonic system to reach a stable state with a shorter response time, which is beneficial for the reduction of cutting-induced defects.
Signal Processing in Ultrasonic Test of Austenitic Welds Based on Time-Frequency Analysis

WANG Bingfang,HAN Zandong,YUAN Keyi,CHEN Yifang

2011-01-01

Abstract:Signal processing in ultrasonic test of austenitic welds was studied.Based on time-frequency analysis,a comprehensive signal processing method was proposed,which was a combination of matching pursuit and wavelet analysis.This method distinguishes flaw information and material noise from a point of energy and frequency,respectively,and improves the SNR of the ultrasonic echo signal.To verify the effectiveness of the method,an ultrasonic test system was established.Test experiment was carried out with a 53 mm thick weld specimen,and a signal with large amount of material noise was acquired.The noised signal was processed by the proposed method.The first 18 time-frequency atoms were extracted by matching pursuit with sym8 wavelet packet dictionary,the extracted signal was analyzed by sym8 wavelet decomposition and reconstructed with low frequency coefficients.The result shows that the material noise is reduced effectively and the flaw echo signal is enhanced significantly.
A Design of Wide-range Frequency-tracking Ultrasonic Power Supply

Yu Fu,Tie Fu,Aimin Wang

DOI: https://doi.org/10.1088/1742-6596/1345/3/032095

2019-11-01

Journal of Physics: Conference Series

Abstract:Abstract Aiming at the problem that the frequency tracking range of commercial ultrasonic power supply on the market is narrow, which makes the load of ultrasonic power supply, a structure of transducer-horn-tool, difficult to match. This paper presents a kind of ultrasonic power supply based on TMS320F28335, which can track the frequency in a wide range(15-21kHz). The advantages, theory, software and hardware structure of the power supply are introduced, which can realize the functions of wide range frequency tracking, power regulation, human-computer interaction and so on. Experiments show that the power supply can well match the ultrasonic vibration load with a wide range of resonant frequencies, and has good human-computer interaction function.
A design of intelligent power ultrasonic supply

Jing-Shuang Gong,Hong-Bin He,Wei-Jun Lin,Jing-shuang Gong,Hong-bin He,Wei-jun Lin

DOI: https://doi.org/10.1109/spawda.2016.7830008

2016-10-01

Abstract:Due to the influence of the manufacturing process and usage environment of the transducer, when the transducer works for a long time, the resonant frequency will drift. So it is necessary to have frequency automatic tracking device in the power ultrasonic supply. Traditional frequency automatic tracking devices have disadvantages of small tracking range, great error and so on. This paper introduces a new kind of power ultrasonic supply based on MCU. It will introduce the design of wave generator, power amplifier and matching network in detail. And it demonstrates a new method of frequency tracking to solve the problem caused by the transducer frequency drift and ensure the output efficiency of the transducer.
Process Monitoring in Ultrasonic Metal Welding of Lithium Batteries by Power Signals

Xinhua Shi,Lin Li,Suiran Yu,Lingxiang Yun

DOI: https://doi.org/10.1115/1.4052704

2021-01-01

Journal of Manufacturing Science and Engineering

Abstract:Ultrasonic metal welding is one of the key technologies in manufacturing lithium batteries, and the welding quality directly determines the battery performance. Therefore, an online welding process monitoring system is critical in identifying abnormal welding processes, detecting defects, and improving battery quality. Traditionally, the peak welding power is used to indicate abnormal process signals in welding process monitoring systems. However, since various factors have complex impacts on the electric power signals of ultrasonic welding processes, the peak power is inadequate to detect different types of welding defects. Therefore, a signal pattern matching method is proposed in this study, which is based on the electric power signal during the entire welding process and thus is capable of identifying abnormal welding processes in various conditions. The proposed method adopts isometric transformation and homogenization as signal pretreatment methods, and Euclidean distance is used to calculate the similarity metric for signal matching. The effectiveness and robustness of the proposed method are experimentally validated under different abnormal welding conditions.
Characterization of Multilayer Ultrasonic Welding Based on the Online Monitoring of Sonotrode Displacement

Zunnong Ma,Yansong Zhang

DOI: https://doi.org/10.1016/j.jmapro.2020.03.007

IF: 5.684

2020-01-01

Journal of Manufacturing Processes

Abstract:Ultrasonic spot welding (USW) of multilayer metal sheets is a critical process of lithium battery manufacturing. However, inconsistent weld quality is still an issue in multilayer USW which makes the online quality monitoring very necessary to provide rapid and reliable feedbacks of each workpiece's weld quality. In this work, the displacement of the sonotrode in the clamping direction was monitored by a high-frequency displacement sensor in order to establish the relationship with the weld quality. Features of displacement signals were analyzed combined with changes in the plastic deformation and welding qualities which were characterized by the laser scanning confocal microscopy, the optical microscopy and the electron backscattered diffraction (EBSD). Besides, effects of welding parameters on the displacement signal were studied. Finally, the relationship between the displacement signal, the plastic deformation and the weld quality was established which can be used for the online quality monitoring of the multilayer USW.
Analysis and measurement of acoustic power in plastics ultrasonic welding process

闫久春,李冬青,董震,杨士勤

1998-01-01

Abstract:A measuring principle for acoustic power in plastics ultrasonic welding process is introduced in this paper. Signal detection circuits of current, voltage, frequency, power for ultrasonic transducer of plastic ultrasonic welder are developed. A computer controlled measuring system is designed to sample the signals of welding process parameters. By using the designed system, the acoustic power curve during welding is calculated, saved, and displayed. And the relation between fusion state of plastics workpieces and input energy of joint is analyzed.
Investigation to Resonant Frequency Control of High Power Ultrasonic Transducer Based on the Beating Model.

Shuyuan Ye,Tianyu Peng,Zhili Long,Zhiming Jiang,Xiangqing Li,Zhonghua Cao

DOI: https://doi.org/10.1016/j.ultras.2023.107195

IF: 4.2

2023-01-01

Ultrasonics

Abstract:The response time of the resonant frequency tracking is a critical parameter to evaluate the performance of a high power ultrasonic system. In this investigation, we present a novel approach of frequency tracking based on the beating vibration model, which demonstrates improvement result compared with the conventional PLL method. We explore and enclose quantitatively the static and dynamic characteristics of the transducer at conditions of different temperatures, driving voltages and frequencies. It is found that the beating vibration occurs if the driving frequency is deviated from the optimal natural frequency. To reveal the mechanism of the beating vibration, an equivalent model is established. We propose a novel calculation algorithm of trust domain method to search accurately the resonant frequency in the response time, ensuring the resonant vibration of the ultrasonic transducer. The verification experiment is conducted in a PFGA and DSP controller, which verifies that the resonant frequency is determined within 30 ms. Our proposed approach can quickly decrease the beating time and fast achieving the resonant vibration, compared with the other frequency tracking methods.
On-line Measurement of Electrical Variables of the Transducer During Ultrasonic Welding and Cutting

闫久春,刘井权,杨士勤

DOI: https://doi.org/10.3969/j.issn.1004-5341.2002.02.009

2002-01-01

Abstract:A measurement system for high power electrical variables with ultrasonic frequency was established. It can measure the effective values of the voltage and the current, the active power, the phase difference of voltage and current, the frequency of the transducer during ultrasonic welding and cutting. In sampling circuits of the system, the measured current is sensed by using a no-capacitance and no-inductance precision resistor and is treated with a difference amplifier, the measured voltage is processed by using a proportional amplifier. For achieving good amplitude-frequency characteristics and rapid measurement of high frequency signals, the resistors, capacitors and amplifiers used in the system are rationally selected. Calibrating experiments show that relative errors are less than 1% for voltage and current effective values and less than 2.5% for active power, and absolute errors are ±1 Hz for frequency and ±1.7°for phase difference of voltage and current in the range of 17～23 kHz.
Single-electrode Feedback Tracking Technology of Traveling Ultrasonic Motor

褚祥诚,李龙土

DOI: https://doi.org/10.3321/j.issn:1002-0470.2002.08.019

2002-01-01

Abstract:This paper represents a closed-loop control system using single-electrode feedback from piezoelectric ceramic to reduce speed fluctuation produced by frequency diversification.
Ultrasonic Low-Frequency Resonant Test of Spot Welding of Zinc-Coated Steel Sheet

CHEN Zhenhua,SHI Yaowu,JIAO Biaoqiang,ZHAO Haiyan

DOI: https://doi.org/10.3321/j.issn:0253-360x.2008.04.026

2008-01-01

Abstract:High order resonance of the ultrasonic transducer was investigated and adopted to inspect spot weld.The transducer can receive the half-wavelength resonance frequency signals from non-welded thin steel sheet because of the ultrasonic multiple reflect in steel sheet,and the frequency of signals is near the high order resonance domain which is out of the bandwidth of the transducer.These signals can be picked up through wavelet packet transform(WPT) because of their special spectrum localization.Thus,the WPT can be adopted to evaluate the joining quality of resistance spot welding of zinc-coated steel sheet.Through analyzing the signals in different scale,the characteristic number which can determine the quality of the spot weld was obtained.This non-destructive evaluation may be used to quantitatively estimate the quality of spot welds.As the low frequency transducer is used,the testing cost is obviously decreased in comparison to the normal testing.
Design of an Automatic Resonance Frequency Tracking Chip for Power Ultrasonic Transducer with a Center Frequency below 100 Khz

Nanxiang Guo,Xiqi Luo,Haixia Yan,Chaoran Liu,Weihuang Yang,Libo Zhao,Linxi Dong

DOI: https://doi.org/10.1109/jsen.2022.3232155

IF: 4.3

2023-01-01

IEEE Sensors Journal

Abstract:This article presents a chip for automatic resonance frequency tracking of power ultrasonic transducer. The transducer admittance and the phase difference of voltage and current are both used for frequency tracking, which solves the disadvantages of narrow frequency tracking range, long tracking time, and easy losing frequency lock in the traditional circuit scheme. Using the transducer voltage signal as the clock, the chip can respond to the transducer signal in every cycle, then maximize the frequency tracking speed, and the total frequency tracking time is less than 10 ms. A 12-bit digital-to-analog convertor (DAC) is built to control the off-chip voltage-controlled oscillator (VCO), the frequency tracking accuracy can reach 0.2‰. Compared with the traditional scheme, it greatly improves the performance and saves the hardware cost.

Frequency Self-Tracking in Ultrasonic Welding Power

Implementing Ultrasonic Guided Wave Mode Control in Hollow Cylinders

Automatic Frequency Tracking Based on Self-Optimizing Fuzzy-Control Approach

Frequency tracking system for ultrasonic motor based on PLL circuit

Frequency Tracking Technology of Ultrasonic Motor Based on Phase-Locked Loop

A Adaptive Frequency Tracking Control Strategy for Ultrasonic Motor Using the Driving Voltage

An Improved Frequency Tracking Strategy in Ultrasonic Transducer

Research and Design of Ultrasonic Power for Ceramic Grinding

A Fast and Accurate Frequency Tracking Method for Ultrasonic Cutting System Via the Synergetic Control of Phase and Current.

Signal Processing in Ultrasonic Test of Austenitic Welds Based on Time-Frequency Analysis

A Design of Wide-range Frequency-tracking Ultrasonic Power Supply

A design of intelligent power ultrasonic supply

Process Monitoring in Ultrasonic Metal Welding of Lithium Batteries by Power Signals

Characterization of Multilayer Ultrasonic Welding Based on the Online Monitoring of Sonotrode Displacement

Analysis and measurement of acoustic power in plastics ultrasonic welding process

Investigation to Resonant Frequency Control of High Power Ultrasonic Transducer Based on the Beating Model.

On-line Measurement of Electrical Variables of the Transducer During Ultrasonic Welding and Cutting

Single-electrode Feedback Tracking Technology of Traveling Ultrasonic Motor

Ultrasonic Low-Frequency Resonant Test of Spot Welding of Zinc-Coated Steel Sheet

Design of an Automatic Resonance Frequency Tracking Chip for Power Ultrasonic Transducer with a Center Frequency below 100 Khz