Abstract:A systematic study was conducted on the impact of annealing treatments on the microstructure and properties of cold-rolled Ti50Ni47Fe3 alloys using optical microscopy, scanning electron microscopy, electron backscattered diffraction, and an electronic universal testing machine. It was found that, during low-temperature annealing (400 °C and 500 °C), the annealing time had no significant effect on the microstructure or properties of the Ti50Ni47Fe3 alloy. Only elongation (δ) increased with the increase in the annealing time, and the grain orientation of the Ti50Ni47Fe3 alloy was //RD (rolling direction). When annealing at medium–high temperature (600 °C), as the annealing time increased, recrystallization and grain growth processes occurred, resulting in a continuous decrease in strength and an increase in δ. Meanwhile, it was found that the grain orientation of the cold-rolled Ti50Ni47Fe3 alloy changed from //RD during the recovery and recrystallization processes to //RD after the grain growth process. The orientation distribution function cross-section φ2 = 45° results indicate that the texture was mainly distributed along the γ orientation line (φ1 = 0~90°, Φ = 54.7°, φ2 = 45°). When annealed at 400 °C and 500 °C, the texture of the Ti50Ni47Fe3 alloys was (111)[uvw]. When the annealing treatment was 600 °C for 120 min, a (110)[uvw] texture occurred. Additionally, ductile fracture occurred in all specimens, and the crack origin was located on one side of the fracture surface, with obvious "Y"-shaped propagation. This article studied annealing treatments of cold-rolled Ti50Ni47Fe3 alloys, providing corresponding theoretical guidance for subsequent production applications.

Influence of Annealing on Microstructure and Mechanical Properties for Hot-rolled Aluminium Composite Brazing Sheet

Annealing coordinates the deformation of shear band to improve the microstructure difference and simultaneously promote the strength-plasticity of composite plate

Effect of annealing temperature on microstructure and tensile properties of copper/aluminum composite thin strip

Effect of annealing processes on microstructure, mechanical properties and conductivity of Cu-12%Ag alloy composite-reinforced by fibers

Effects of Annealing on Microstructure and Mechanical Properties of 20vol%zrcp/w Composite

Effect of Annealing Treatment on the Mechanical Properties and Corrosion Behaviors of 01570 Aluminum Alloy

Effect of Annealing Process on Microstructure and Properties of Rolled Semi-solid Billet

Effect of annealing process on microstructure and mechanical properties of precipitated phase of A1235 aluminum alloy

Effect of annealing treatment on the microstructure and mechanical properties of bulk nanostructured Ti/AZ61 composites prepared by hot pressing

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

The Dependence of Final Microstructure, Texture Evolution and Mechanical Properties of Al–Mg–Si–Cu Alloy Sheets on the Intermediate Annealing

Effects of annealing on microstructures and properties of cold-rolled GH3536 sheet

Effect of annealing temperature on microstructure and properties of 1100 MPa grade cold-rolled dual-phase steel

Effect of Annealing and Double Aging on the Microstructure and Mechanical Properties of Hot-Rolled Al17Cr10Fe36Ni36Mo1 Alloy

Effect of annealing on tensile and thermal expansion properties of Mg2B2O5 whisker-reinforced aluminum composite

Effect of annealing on properties of Al/steel composite plates prepared by surface oxidation treatment before cold roll bonding

Microstructure, mechanical and corrosion performance of AA4343/AA3003/AA4343 laminated sheets subjected to cryorolling and annealing

Microstructure and Mechanical Properties of 4343/3003/6111/3003 Four-Layer Al Clad Sheets Subjected to Different Conditions

Effects of annealing on periodic microstructure and mechanical properties of inter-layer hammering hybrid wire arc additively manufactured aluminum alloy

Effect of Heat Treatment on the Interfacial Structure and Microstructure of Al/Al/Cu Composites Prepared by Different Accumulative Roll Bonding Passes

Effects of Annealing Process on Microstructure and Mechanical Properties of Hot Rolled Medium Carbon Steel Plate