Abstract:The effect of rolling temperature on the incomplete recrystallization behavior and the relationship to mechanical properties in 0.06C–4Mn-1.2Cr (wt.%) steel was investigated. Three plates of experimental steel were produced by hot rolling at different temperatures and intercritical annealing processes in this study. The microstructure of experimental steels was examined by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscatter diffraction (EBSD), and transmission electron microscope (TEM). The mechanical properties of test steel were examined by impact test and tensile test. Austenite reversion and cementite precipitation-dissolution was numerically simulated under the assumption of local equilibrium. With the decrease of hot rolling temperature from 1000 °C to 800 °C, the uniform equiaxed prior austenite grains microstructures changed to heterogeneous microstructures of laminated and ultrafine prior austenite grains arranged alternatively. The tensile and impact tests revealed that the medium manganese steels rolling at 800 °C had an excellent combination of mechanical properties. Elongation had a great relationship with retained austenite fraction and stability. The fractography of impact specimens was examined to explore the toughening mechanism of the micro-laminated steels. The steel with uniform equiaxed grain structure exhibited a relatively low tensile strength of 750 MPa and low elongation of ∼20% and an extremely poor low-temperature toughness of ∼40 J at −40 °C. An enhanced low-temperature toughness (∼233 J at −40 °C), as well as an improved tensile strength (823 MPa) and higher elongation of ∼40%, was obtained in the steel with heterogeneous microstructures. The content of austenite in heterogeneous microstructure is twice that in uniform equiaxed grain structure. And cementite dissolved more thoroughly in the heterogeneous microstructure. The high austenite content of heterogeneous microstructures enabled the steel to be significantly stronger and ductile, which contributed to the high tensile strength and elongation to some extent. It is concluded that the effect of interface decohesion resulted in the occurrence of delamination. And the high austenite content and delamination greatly improved the low-temperature toughness of experimental steel.

Effect of Cooling Rate on Pearlite Phase Transformation Behavior of 55Mn Steel

Effect of Finished Rolling Cooling Rate on Structure of Microalloy Non Quenched-Tempered Steel 34Mn2VN

Effects of Alloying Elements and Cooling Rates on the High-Strength Pearlite Steels

Influences of Alloying Elements on Continuous Cooling Phase Transformation and Microstructures of Extremely Fine Pearlite

Effect of Cooling Process on Microstructure and Mechanical Properties of Hot Rolled 65Mn Steel

Small Range Control of Pearlite Microstructure and Properties of 65Mn Hot Rolled Narrow Strip

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Effect of Cooling Rate on Microstructure Evolution and Mechanical Properties of SCM435 Steel

Progress in Effect of Alloying Element Partition on Thermodynamics and Kinetics of Pearlite Transformation and Its Austenitization

Continuous Cooling Phase Transformation Rule of 20crmnti Low-Carbon Alloy Steel

Effect of rolling temperature on microstructure and mechanical properties of medium manganese steel

Effect of Deformation and Cooling Rate on the Transformation Behavior and Microstructure of X70 Steels

Investigation on Processing for a Titanium-Microalloyed Hot Rolled Dual Phase Steel

Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb–Ti Microalloyed Low Carbon HSLA Steel

Effect of Cooling Rate on Microstructure and Mechanical Properties of a Microlaminated Low-Density Steel

Effects of high-temperature deformation and cooling process on the microstructure and mechanical properties of an ultrahigh-strength pearlite steel

Effect of annealing temperature on microstructure and properties of 1100 MPa grade cold-rolled dual-phase steel

Influence of cooling rate on microstructure evolution in a low carbon high strength microalloyed dual phase steel

Effects of Cooling Rate on Microstructure, Mechanical Properties, and Residual Stress of Fe-2.1B (wt%) Alloy

Microstructure of warm rolling and pearlitic transformation of ultrafine-grained GCr15 steel

Effect of Austenitizing Temperature on Pearlite Transformation of a Medium-Carbon Steel