Abstract:<p>The focus of this work is to characterize the progressive damage and failure behavior of 2.5D woven alumina fiber reinforced silica ceramic matrix thin composite specimen under a planar tension-shear stress state. The tensile and shear stress-strain diagrams in the principal material coordinate system were obtained using the off-axis tension test with the digital image correlation technique. A mesoscale finite element model of the composite material was developed within the framework of continuum damage mechanics. The thickness effect on the macroscopic mechanical response was considered by removing the periodic boundary conditions along the thickness direction. The macroscopic stress-strain response given by the numerical model was validated by the experimental results. The interaction of the planar biaxial tension and shear stresses was taken into account in the model, quantified using a shear contribution coefficient in the modified 3D Hashin failure criterion. The results from the damage evolution analysis indicate that the linear tensile stress-strain response with a brittle fracture characteristic for the on-axis tension specimen is governed by the axial fiber bundle. The nonlinear tensile stress-strain response with the significantly reduced ultimate stress under biaxial tension and shear stress state results from multiple damages with evolution in both axial and transverse fiber bundles. Both the effective tensile modulus and the ultimate tensile strength increase with increasing the thickness of the specimen due to the increase of the fiber volume fraction. The strengthening induced by the size effect is less significant for the specimen under biaxial tension and shear stress state than that for the on-axis tension specimen owing to the involvement of shear response dominated by the matrix of the material. The results of this study provide new insight into the failure of 2.5D woven ceramic-based composite material, which contributes to the optimal design of the reusable thermal protection system structure.</p>

FEM analysis of internal stress of composite ceramics and its toughness mechanism

Reinforcement mechanisms and optimum design of laminated ceramic composites

Study on the Correlativity Between Grinding Parameters and Surface Residual Stresses in Ceramic

Finite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual Reduction

MECHANICAL PROPERTIES AND OPTIMAL ANALYSIS ON VARIOUS LEVEL MICRO-COMPOUNDED CERAMIC COMPOSITE

A NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON TOUGHENING DESIGN OF MULTILAYER CERAMIC

Fracture resistance of Ceramic-Polymer hybrid materials using microscopic finite element analysis and experimental validation

Proposal of two parameters to evaluate in-situ apparent toughness of interphase in fiber reinforced ceramic matrix composites: Three-dimensional finite element simulations

Formation and Effects of Interfacial Stress on the Microstructures for Multilayer Cofired Systems

Failure Characterization of Solid Structures Based on an Equivalence of Cohesive Zone Model

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

A MECHANICS ANALYSIS OF STRENGTHENING-TOUGHENING DESIGN OF MULTILAYER STRUCTURE CERAMICS

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Finite Element Analysis of Residual Stress Distribution Patterns of Prestressed Composites Considering Interphases

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Design of particulate strengthened ceramics

Evolution of the microcracks in whisker toughening ceramic matrix composites

Stress Transfer Model and Micromechanic Analyses of Unidirectional Single-short-fiber Composite

The Stiffness and Strength of Transformation Toughening Ceramics with Misoriented Microcracks

Coupling Residual Stress Field to Enhance the Simulation Accuracy of Crack Propagation and Mechanical Responses of High Entropy Ceramics Reinforced by Graphene and Alumina

Experimental and numerical investigation of progressive damage and failure behavior for 2.5D woven alumina fiber/silica matrix composites under a complex in-plane stress state