Abstract:The boiling flow and heat transfer performance of four different pin-fins in microchannels are investigated through visualization experiment research. Flow boiling visualization results have been conducted by using deionized water as working fluid with circulating under flow rates in the range of 0.25~9kg/h, with the inlet temperature as 30 ℃ and heating power as 126W. The experimental results show that the flow patterns in the channel are mist flow, annular flow, isolated bubble and no bubble. And the flow pattern corresponds to the pressure change. With the increase of Re, the pressure drop in the microchannel first increases rapidly, then decreases, and finally increases again. The change process of pressure drop corresponds to the bubble heat transfer process. The corresponding heat transfer processes include film boiling、transition from film boiling to nucleation boiling、nucleation boiling and single-phase convection. At the same time, the state of bubbles in the channel can correspond to the intensity and mode of heat transfer. The average surface temperature of the bottom plate decreases with the increase of Re. The average convective heat transfer coefficient increases, then decreases and increases again with the increase of Re. The twice increases are mainly due to liquid film evaporation and single-phase flow transition. The average convective heat transfer coefficient increases with the increase of heat flux. And in four different micro-fin shapes, the heat transfer effect of triangle fin array is the best, because the disturbance of triangle to fluid is the most intense. While in the nucleation boiling region, the convective heat transfer coefficient of triangle micro-fin arrays is the largest. At that stage, the bubbles in triangle micro fin array grow and separate more easily.When the Re is less than 130, the number of bubbles in the triangle micro array is great than that in the ellipse micro array, and the bubble departure diameter is the largest, as well. And the bubble growth time and bubble waiting time are the shortest. When Re is greater than 130, the number of bubbles in the channel is relatively small, and the nucleation boiling intensity decreases. When the Re continues to increase, there are few or no bubbles in the channel, which is close to the single-phase convection. Moreover, the pressure drop, bottom temperature and convective heat transfer coefficient of triangle micro fin array change most obviously. The results show that when Re increases from 30 to 125, the bottom temperature decreases by 41 ℃, the maximum convective heat transfer coefficient reaches 16800 w / m2 · ℃, and the maximum Nu is 10.

Effect of different heating power on flow and convective heat transfer characteristics of triangle micro pin fins

Convective heat transfer in micro pin fin heat sinks with different cross section shapes under variable heating loads

Effects of Heating Load on Flow Resistance and Convective Heat Transfer in Micro-Pin-Fin Heat Sinks with Different Cross-Section Shapes

The Flow Resistance and Heat Transfer Characteristics of Micro Pin-Fins with Different Cross-Sectional Shapes

Influence of heating load on heat transfer characteristics in micro-pin-fin arrays

FLOW AND HEAT TRANSFER IN HYDROPHOBIC MICRO PIN FINS WITH DIFFERENT CONTACT ANGLES

Experimental study on the effect of shape on the boiling flow and heat transfer characteristics of different pin-fin microchannels

Experimental Study of Water Flow and Heat Transfer in Silicon Micro-Pin-Fin Heat Sinks

Effect of Square Pin-Fin Twist on Thermo-Hydraulic Performance of a Rectangular Channel in Forced Convection

Experimental and Numerical Investigation of Hydrothermal Performance of a Microchannel Heat Sink with Pin Fins

Experimental Study on Liquid Flow and Heat Transfer in Micro Square Pin Fin Heat Sink

Experimental Study of Saturated Flow Boiling Heat Transfer in an Array of Micro-pin-fins

Numerical Study On Forced Convective Heat Transfer In Porous Pin Fin Channels

Forced convective heat transfer characteristics in micro/minicylinders group at low Reynolds number

Systematic Comparison on Convective Heat Transfer Characteristics of Several Pin Fins for Turbine Cooling

Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins

Experimental study of flow boiling two-phase frictional pressure drop in an array of micro-pin-fins

Heat transfer of circular shaped micro/mini pin-fin heat sink

Influence of heat flux on forced convective heat transfer in duct with micro-cylinder-group

Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes

A Numerical Comparison of Thermal Performance of In-Line Pin–fins in a Wedge Duct with Three Kinds of Coolant