Abstract:Reliability of power converters is of crucial importance in switched reluctance motor drives used for safety-critical applications. Open-circuit faults in power converters will cause the motor to run in unbalanced states, and if left untreated, they will lead to damage to the motor and power modules, and even cause a catastrophic failure of the whole drive system. This study is focused on using a single current sensor to detect open-circuit faults accurately. An asymmetrical half-bridge converter is considered in this study and the faults of single-phase open and two-phase open are analysed. Three different bus positions are defined. On the basis of a fast Fourier transform algorithm with Blackman window interpolation, the bus current spectrums before and after open-circuit faults are analysed in details. Their fault characteristics are extracted accurately by the normalisations of the phase fundamental frequency component and double phase fundamental frequency component, and the fault characteristics of the three bus detection schemes are also compared. The open-circuit faults can be located by finding the relationship between the bus current and rotor position. The effectiveness of the proposed diagnosis method is validated by the simulation results and experimental tests.

Research on PWM Drive Signal Faults of Electric Motor Drive System for Hybrid Electric Vehicle

Modeling and Fault Analysis on Hybrid Stepping Motor Subdivision Drive System

Research on fault analysis and diagnosis of PMSM in HEV

Modeling and Fault Analysis on Brushless DC Motor Drive System

Power Electronic Load System for Motor Drivers Testing Considering Motor Faulty Status Simulation

Fault Analysis for Drive System of Brushless DC Motor

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Faults and Fault Modes Analysis of Electric Vehicle Drive System in Electric Vehicle

Research on Drive System of Induction Motor for Hybrid Electric Vehicle

The simulation and analysis of DC motor driver system for the hybrid electric vehicle

An Embedded Fault-Tolerant Control Method for Single Open-Switch Faults in Standard PMSM Drives

Research on the Fault Tolerant Control and Its Dynamic Performance of Brushless Permanent Magnet Motor With Faults in Hall Sensor

Research of Stability Control of Distributed Drive Electric Vehicles under Motor Failure Modes

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Real-Time Fault Diagnosis and Fault-Tolerant Control Strategy for Hall Sensors in Permanent Magnet Brushless DC Motor Drives

High-Performance Fault Diagnosis in PWM Voltage-Source Inverters for Vector-Controlled Induction Motor Drives

PWM-VSI Fault Diagnosis for a PMSM Drive Based on the Fuzzy Logic Approach

Fault-Tolerant Control for Open-Winding Permanent Magnet Compact In-Wheel Motor Drive System

Reconstructed control of motor drive system in hybrid electric vehicle against sensor failures

Open-circuit Fault Diagnosis for OEW-PMSM Drives Based on Finite-Control-set Model Predictive Control

An Open-Circuit Fault Detection Method of PMSM Fed by Dual Inverter with High Robustness