Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Modeling and Fault Analysis on Hybrid Stepping Motor Subdivision Drive System

Modeling and Fault Analysis on Brushless DC Motor Drive System

Performance Simulation of Long-Stator Linear Synchronous Motor for High-Speed Maglev Train under Three-Phase Short-Circuit Fault

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Fault Analysis for Drive System of Brushless DC Motor

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Modeling and Simulation of Short Circuit Faults in Stator Coils of Brushless DC Motor

Fault Diagnosis Research for Hybrid Excitation BLDCM

Modeling and fault diagnosis of interturn short circuit for five-phase permanent magnet synchronous motor

Simulation of Hybrid Stepping Motor System with Fixed Total-current Driver

Analysis and Simulation of Torque-Frequency Characteristics of Five-phase Hybrid Stepping Motor

Research on Method of SPWM Constant Moment and Subdivided Driving for Two-phase Hybrid Stepping Motor

Fault Analysis on Driving Motors of Lunar Rover Wheels

Research on phase current and bus current of two-phase hybrid stepping motor and control system

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Open Circuit Fault Diagnosis of Five Phase Permanent Magnet Synchronous Motor Drive System Based on Hybrid Logic Dynamic Model

Simulation of Brushless DC Motor System Based on Switching Function

Research on PWM Drive Signal Faults of Electric Motor Drive System for Hybrid Electric Vehicle

Research of Multi-Degree-of-Freedom Stepper Motor Drive System

Research of High Precision Control System of Two-phase Hybrid Stepping Motor