Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Fault Analysis for Drive System of Brushless DC Motor

Design and analysis on voice coil motors drive system

Simulation Brushless DC Motor and Driver with PSpice

Analysis of Inter-Turn Short-Circuit Faults in Brushless DC Motors Based on Magnetic Leakage Flux and Back Propagation Neural Network

Failure Analysis and Experiment of Brushless DC Motor

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Fault Tolerant Control for Open Winding Brushless DC Motor with Power Device Failure

Fault-Tolerance Analysis Of Multi-Phase Single Sided Matrix Converter For Brushless Dc Drives

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

A Fault-Tolerant Direct Torque Control Strategy for A Brushless Dc Motor Driven by A Single Sided Matrix Converter

Research on fault diagnosis of drive motor based on MATLAB / Simulink simulation

Comparative Performance Evaluation of Hall Effect Sensorless Control Options in Permanent Magnet Brushless DC Motor Drives

Detection and Evaluation of the Inter-turn Short Circuit Fault in a BLDC-Based Hub Motor

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Transient Analysis of a New Outer-Rotor Permanent-Magnet Brushless DC Drive Using Circuit-Field-torque Coupled Time-Stepping Finite-Element Method

Fault- ToleranceAnalysis Ofmulti-Phase Single

Diagnosis of Interturn Short Circuit Fault in BLDCM Based on Coupled High-Frequency Signal Injection

Fault Diagnosis in the Brushless Direct Current Drive Using Hybrid Machine Learning Models

An economical and simple strategy for overcoming the Hall sensor faults in three phase brushless DC motor drive

Control Analysis of PM Brushless DC Motor Used in Flywheel Energy Storage System

Analysis And Solution Of Single Phase Winding Broken Fault Of Bldcm