Abstract:With the goal of improving processability of imide oligomers and achieving of high temperature carbon fiber composite, a series of Thermosetting Matrix Resin solutions (TMR) were prepared by polycondensation of aromatic diamine (3,4′-oxybisbenzenamine, 3,4-ODA) and diester of biphenylene diacid (BPDE) using monoester of 4-phenylethynylphthalic acid (PEPE) as end-capping agent in ethyl alcohol as solvent to afford phenylethynyl-endcapped poly(amic ester) resins with calculated molecular weight (Calc’d Mw) of 1500–10,000. Meanwhile, a series of reactive diluent solutions (RDm) with Calc’d Mw of 600–2100 were also prepared derived from aromatic diamine (4,4′-oxybisbenzenamine, 4,4-ODA), diester of asymmetrical biphenylene diacid (α-BPDE) and monoester of 4-phenylethynylphthalic acid (PEPE) in ethyl alcohol. Then, the TMR solution was mixed with the RDm solution at different weight ratios to afford a series of A-staged thermosetting blend resin (TMR/RDm) solutions for carbon fiber composites. Experimental results demonstrated that the thermosetting blend resins exhibited improved melt processability and excellent thermal stability. After being thermally treated at 200 °C/1 h, the B-staged TMR/RDm showed very low melt viscosities and wider processing window. The minimum melt viscosities of ≤50 Pa·s was measured at ≤368 °C and the temperature scale at melt viscosities of ≤100 Pa·s were detected at 310–390 °C, respectively. The thermally cured neat resins at 380 °C/2 h showed a great combination of mechanical and thermal properties, including tensile strength of 84.0 MPa, elongation at breakage of 4.1%, and glass transition temperature (Tg) of 423 °C, successively. The carbon fiber reinforced polyimide composite processed by autoclave technique exhibited excellent mechanical properties both at room temperature and 370 °C. This study paved the way for the development of high-temperature resistant carbon fiber resin composites for use in complicated aeronautical structures.

Preparation of Phenolic Injection Molding Materials with Excellent High Heat Stability of Appearance Characteristics

Preparation of glass fiber reinforced phenolic injection molding materials and its properties

Preparation of Magnesium Hydroxide Sulfate Whisker-Phenolic Resin Composite by In-Situ Polymerization Technique and Its Properties

Novel benzoxazine/epoxy/phenolic molding compound and its thermal stability

Properties of Phenolic Molding Compounds Reinforced with Sisal Fiber

Study of Post-curing Properties of Wood Flour Reinforced Phenolic Molding Materials

New Insights into High-Ortho Phenolic Novolac: Elucidating Dependence Between Molecular Structure, Curing Kinetics and Thermal Stability

Preparation of a Novel Stabilizer and Its Thermal‐oxidative Stabilization Effect on Polyamide 6

Thermal Stability and Thermal Degradation Study of Phenolic Resin Modified by Cardanol

Structural Evolution of Phenolic Fibers during the Forming Process

Preparation and Properties of Molybdenum‐modified High‐ortho Thermosetting Phenolic Fiber

Development of High Temperature Resistant Stereocomplex PLA for Injection Moulding

Development of an Injection Molding Process for Long Glass Fiber-Reinforced Phenolic Resins

Preparation and properties of high-temperature resistant bisphthalonitrile resins containing trifluoromethyl groups reinforced by poly (aryl ether nitrile) capped by phthalonitrile and composites

Synthesis and Thermal Degradation Study of Polyhedral Oligomeric Silsesquioxane (POSS) Modified Phenolic Resin

Preparation of high molecular weight thermoplastic bio-based phenolic resin and fiber based on lignin liquefaction

A Pyridazine-Containing Phthalonitrile Resin for Heat-Resistant and Flame-Retardant Polymer Materials

Improved Melt Processabilities of Thermosetting Polyimide Matrix Resins for High Temperature Carbon Fiber Composite Applications

Preparation and Microwave Curing of Blended Phenolic Epoxy Fibers

Mechanical and thermal properties of phenolic/glass fiber foam modified with phosphorus-containing polyurethane prepolymer

Preparation method and application of polymer-based heat conduction plastic