Abstract:High-quality zeolite silicalite-1 membranes with a large area (78.5cm2) were successfully prepared on porous, tubular stainless steel (PTSS) supports with optimized synthesis solution composition by a two-stage varying-temperature in situ synthesis. Compared with the synthesis at constant temperature (one-stage), the two-stage varying-temperature in situ synthesis (TSVTS) generated a thin and dense membrane, since a large number of new nuclei could form at low temperature, while the crystallization temperature was rapidly changed to a high temperature after completion of the nucleation period, a thin and continuous membrane would quickly formed on the support by the nuclei regrowth. The membranes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and single-gas permeation. These results indicate that the membranes prepared by the TSVTS method exhibit high gas permeation performance and good reproducibility. H2 permeance and H2/n-C4H10 selectivity of the membranes by TSVTS method reached to 12.25×10−7mol/(m2sPa) and 46.1, respectively. And the yield of high-quality membranes with perm-selectivity of H2/n-C4H10 larger than 25 (which is almost five times as large as the Knudsen factor) as a quality criterion reached to 70% of all preparations. By comparison of their permeability and reproducibility with those reported in the literature, it was revealed that the prepared membranes by TSVTS method were of good quality. Moreover, their thermal stability were tested in a gas mixture of ethylbenzene and hydrogen at high temperature, for an example, the membrane having the separation selectivity of hydrogen and ethylbenzene mixture as high as 190 is stable after 80h of run at 400°C, suggesting the membrane is thermally durable for long time operation.

Synthesis of TS-1 Molecular Sieve Membrane and Specification

SYNTHESIS OF ZSM-5 ZEOLITE MEMBRANE ON DIFFERENT CARRIERS BY ONE STEP IN SITU HYDROTHERMAL METHOD

Synthesis of b-Oriented MFI-Type Zeolite Membrane on Porous Glass Support by in Situ Hydrothermal Crystallization

SYNTHESIS AND CHARACTERIZATION OF A-TYPE ZEOLITE MEMBRANES ON ALUMINA PARTICLES SURFACE

Template-free Synthesis of TS-1 Zeolite Film on Tubular Mullite Support

Synthesis of TS-1 Molecular Sieves Using Mixed Silicon Sources and Their Catalytic Performance for Removing Thiophene

Preparation of hierarchical TS-1 zeolite membrane via a dissolution–recrystallization process

Ultrasonic-assisted Fabrication of High Flux T-type Zeolite Membranes on Alumina Hollow Fibers

Preparation of Silicalite-1 Membranes on Stainless Steel Supports by a Two-Stage Varying-Temperature in Situ Synthesis

Preparation of Zeolite X Membranes on Mesoporous Ceramic Substrates

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

A Novel Method to Synthesize High Performance Silicalite-1 Membrane

Preparation and Properties of TS-1 Zeolite and Film Using Sil-1 Nanoparticles As Seeds

Study on Crystallization Kinetics for Synthesis of Ts-1 Zeolite and Its Catalytic Performance

Study on the Synthesis of Clay-Based Titanium Silicalite-1 Catalytic Composite

Preparation of Titanium Silicalite-1 Catalytic Films and Application As Catalytic Membrane Reactors

Synthesis and Catalytic Performance of Titanium Silicalite Molecular Sieve TS- 1

Hydrophilicity/hydrophobicity Modulated Synthesis of Nano-Crystalline and Hierarchically Structured TS-1 Zeolites

Synthesis and structural analysis of Silicalite-1 membranes by coating technique with nanosized seed

Preparation and characterization of silicalite-1 membrane on a silicalite-1/TiO2 composite layer

Primary Hydrothermal Synthesis and Technological Conditions Optimization of ZSM-5 Membrane