Abstract:The steel plate shear walls (SPSWs) have been proven effective in reinforced concrete frames (RCFs) as a lateral force‐resistant structure. Despite of advancements, accurately predicting the ultimate shear capacity of RCFs with SPSWs remains challenging using current simplified models. Additionally, the flexural capacity design procedure for the boundary elements (beams and columns) in previous studies of RCF‐SPSWs involved intricate iterative procedures, hindering its widespread implementation. To address the two issues, this paper investigates the pushover responses and the plate‐frame interaction (PFI) of an RCF‐SPSWs system using theoretical and numerical methods. There are three main contributions. First, a theoretical model of ultimate shear capacity for RCF‐SPSWs is proposed, which can also be used to predict shear contributions of boundary frames in RCF‐SPSWs. Calculation errors for ultimate shear capacity of RCF‐SPSWs and shear contribution from the boundary frame are only 3.7% and 6.7% respectively, which are reduced dramatically compared with the traditional model. A simplified schematic diagram for the global collapse mechanism (uniform distribution of plastic hinges within a structure) of RCF‐SPSWs is developed to facilitate the calculation of internal work and reaction forces. Secondly, a flexural capacity design method for the boundary elements to avoid in‐span plastic hinges is proposed. The proposed method enables the achievement of direct estimation of the flexural demands that could trigger a global collapse mechanism, all without intricate iterative procedures. The applicability of current assumptions for the design of steel boundary frame in RCF‐SPSWs system is discussed, and engineering suggestions are provided to ensure safer and more economic designs. Comparison results confirmed the applicability of the proposed design method, which can be adopted to achieve the global collapse mechanism for RCF‐SPSW system. Thirdly, impacts of yielding panel actions on the flexural capacity of boundary elements of RCF‐SPSWs are clarified. Comparison results demonstrated that adding SPSWs to an RCF alters the axial force on boundary elements and significantly impacts the flexural capacity. A design suggestion is made to emphasize the importance of avoiding the balanced failure of boundary elements. The proposed theoretical model can be used to economize the cross‐section of boundary elements in RCF‐SPSWs system under seismic loads due to accurate prediction of their shear contribution; the proposed flexural capacity design method can achieve a global collapse mechanism, and thus the structural safety and energy dissipation capacity are improved; moreover, the building design efficiency is also improved due to avoidance of intricate iterative procedures.

DESIGN OF STEEL PLATE SHEAR WALL STRUCTURES CONSIDERING THE CONTRIBUTION OF BOUNDARY FRAME

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

STUDY OF ELASTIC-PLASTIC DESIGN TECHNOLOGY OF UNSTIFFENED STEEL PLATE SHEAR WALL

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Shear Stability and Resistance Design of Novel Vertically-Flexible Stiffened Steel Plate Shear Walls

Theoretical model of ultimate shear capacity and flexural capacity design method of boundary elements for reinforced concrete frames with steel plate shear walls

Analysis of Concrete Filled Square Steel Tubular Frame-Steel Plate Shear Wall Structural Systems

An Overview of Current State-of-the-art in Behavior and Design Theory for Unstiffened or Buckling-Restrained Steel Plate Shear Walls

Shear Resistance Design of Prefabricated Corrugated Steel Plate Shear Walls with Reinforced Boundary Elements

Mechanical performance and design method of two-side-connected SPSW reinforced on free edges

Experimental study on three types of steel plate shear walls under cyclic loading

HYSTERETIC BEHAVIOR OF BUCKLING-RESTRAINED STEEL PLATE SHEAR WALL

Elasto-Plastic Seismic Shear Distributions of Frame-Wall Structures

Theoretical and experimental study on the interaction between slotted steel plate shear wall and boundary frame

Characteristics of the wall–frame interaction in steel plate shear walls

Interaction behaviour of buckling-restrained steel plate shear wall and boundary composite frame

Analysis and Application of Double Steel Plate Concrete Composite Shear Wall in the R&D Building of Zhanjiang Bay Laboratory

Seismic behavior of code designed steel plate shear walls

Experimental Research on the Seismic Behavior of CSPSWs Connected to Frame Beams

Numerical study of steel plate shear walls with diverse construction configurations

Seismic behavior of composite frame infilled composite steel plate shear walls