Abstract:For spot scanning dark-field scattering technology, the defocus caused by the change in wafer surface height decreases the defect detection rate and size measurement repeatability. The demand for accurately and rapidly measuring the wafer surface height online is becoming increasingly urgent. The defect detection system integrates scattering, reflection, film, and topography defect detection channels. The integration of laser-triangulation-based defocus measurement into the bright-field optical path is proposed. The laser beam is directed onto the surface of the wafer, and the reflected light is transmitted through a lens onto the photosensitive surface of a four-quadrant detector. This detector captures both the strength and position of the reflected signal simultaneously. In this paper, a triangulation-modified model is established to obtain the height of each inspection spot on the wafer surface through the position signal of the reflected image. When the signal-to-noise ratio of the simulated reflection image position is 20 dB, the signal-to-noise ratio of the height measurement resolved by the triangulation-modified model is 41 dB, and the measurement error is less than 0.2 μm, indicating that the model has a noise suppression effect. The spot-scanning imaging system is established, and the height measurement results of the triangulation measurement model are verified using a laser interferometer. Within the travel range of 69 μm, the system has a measurement accuracy better than ±1 μm and a measurement repeatability better than ±0.2 μm, which meet the measurement requirements of the spot scanning imaging system. The system is utilized for defect detection and defocus measurement of the wafer surface, along with the motion mechanism, to accurately and rapidly obtain the height distribution of the wafer surface.

X-ray laser Moire-fringe deflectometry diagnostic at low irradiance of pumping optical laser

Moir? artifacts reduction in Talbot-Lau X-ray phase contrast imaging using a three-step iterative approach

Sub-wavefront Slope Measurement Based on Talbot Effect Moiré Fringe Technology

X-ray wavefront sensing and optics metrology using a microfocus x-ray grating interferometer with electromagnetic phase stepping

REFRACTIVE-INDEX MEASUREMENT AND ROOM-TEMPERATURE SELF-FREQUENCY-DOUBLED LASER OPERATION OF THE ND-MGO-LINBO3 CRYSTAL

Experimental Study of Moiré Fringes in Laser Scanning Confocal Microscopy

Experimental study on nanometer moire method

Precise Measuring of Crystals by X-Ray Laser Apparatus Interference

Combining laser-induced fluorescence and light-scattering microscopies to diagnose low-fluence damage precursors on KDP-based crystal surface

Hard X-Ray Transmission Curved Crystal Spectrometers (10–100 Kev) for Laser Fusion Experiments at the ShenGuang-III Laser Facility

Characterization of A Multi-Kev X-Ray Source Produced by Nanosecond Laser Irradiation of A Solid Target: the Influence of Laser Focus Spot and Target Thickness

Experimental study of moire fringes in laser scanning confocal microscopy

High-resolution, highly monochromatic, time-framed, x-ray-backlit-imaging diagnostics with dual-channel toroidal crystals

Laser Confocal Feedback Profilometry

A study on the digital nano-moiré method and its phase shifting technique

External-Cavity Birefringence Feedback Effects of Microchip Nd:Yag Laser and Its Application in Angle Measurement

Optical Circular Deflector with Attosecond Resolution for Ultrashort Electron Beam

Double-edge scan wavefront metrology and its application in crystal diffraction wavefront measurements

1.57 Times Diffraction-Limit High-Energy Laser Based on a Nd:YAG Slab Amplifier and an Adaptive Optics System

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

Single Crystalline Molybdenum Nanostructure for Generating Reflective Micro-Focal Spot X-rays: Structure-controllable Preparation and Characteristic-Selectable Radiation