Abstract:The Hazelett continuous casting and rolling process represents a leading-edge production method for cold-rolled aluminum sheet and strip billets in the world. Its solidification microstructure significantly influences the quality of billets produced for cold rolling of aluminum sheets and strips. In this study, employing the CAFE (Cellular Automaton—Finite Element) method, we developed a coupled computational model to simulate the solidification microstructure in the Hazelett continuous casting process. We investigated the impact of nucleation parameters, casting temperature, and continuous casting speed on the microstructural evolution of the continuous casting billet. Through integrated metallographic analyses, we aimed to elucidate the controlling mechanisms underlying the Hazelett continuous casting process and its resultant microstructure. The results demonstrate that the equiaxed rate of grains increases with an increase in nucleation density, and the grain size decreases under constant cooling strength. With other nucleation parameters held constant, the grain size decreases as undercooling increases, and the columnar crystal zone expands. The nucleation density of the Hazelett continuous casting aluminum alloy has been determined to range between 1011 m−3 and 1013 m−3, and the undercooling ranges between 1 °C and 2.5 °C. The solidified grain structure can be controlled between 35 μm and 72 μm. The grain size of the continuous casting billet increases with an increase in pouring temperature and decreases as the casting speed increases. Elevating the pouring temperature positively impacts the fraction of high-angle grain boundaries and promotes the dendritic to equiaxed grain transition. Moreover, there exists potential for further optimization of continuous casting process parameters.

Advances of Continuous Casting of Aluminium Alloy Billets

Recent Developments in Semi-Continuous Casting of Aluminum Alloy Billets and Slabs

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

Technology Development of High Toughness and Ultra-heavy Plate Rolled by 400mm Continuous Casting Billet

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Simulation and Study of Influencing Factors on the Solidification Microstructure of Hazelett Continuous Casting Slabs Using CAFE Model

A review of chamfer technology in continuous casting process

Theoretical Analysis of the Solidification of Aluminum Alloy Billet in Air-Slip DC Mold

Alloy development and process innovations for light metals casting

Melt Conditioned Direct Chill Casting (MC-DC) Process for Production of High Quality Aluminium Alloy Billets

High-strength aluminum alloys hollow billet prepared by two-phase zone continuous casting

Application Status and Development Trend of Continuous Casting Reduction Technology: A Review

The Effect of Temperature, Cooling Rate and Casting Speed on Quality of Continuous Cast Steel Billets

Effect Of Coupled Annular Electromagnetic Stirring And Intercooling On The Microstructures Macrosegregation And Properties Of Large-Sized 2219 Aluminum Alloy Billets

Control of Microstructure and Macrosegregation of Large-Sized Aluminium Alloy Billet by Uniform Direct Chill Casting

Homogenization Path Based on 250 mm × 280 mm Bloom under Mixed Light and Heavy Presses: Simulation and Industrial Studies

Review of the Investment Casting of TiAl Based Intermetallic Alloys

Research on Magnetic Floating Horizontal Continuous Casting Process (MFCC) for Nearly Net-Shape Molten Metal Afterheat Billet

Continuous Casting of TiAlNb Alloys with Different Velocities by Mixing Binary TiAl Ingot and Nb Wire