Abstract:OBJECTIVE:To evaluate the deviation of digital implant surgical guides during fabrication process in the Organical Dental Implant (ODI) system. METHODS:This study included two parts. The first part was the in vitro study. A resin block with a diagnostic template was used for the planning. After cone beam computed tomography (CBCT) scanning, a surgical guide with eight implants was virtually designed using the ODI system. The guide was milled by a 5-axial numerical controlled milling machine, and an optical scanning was taken to digitalize the guide to a standard tessellation language (STL) form. The STL data were then imported into an ODI software and registered with the original design. The deviation of the sleeves between the design and the STL was measured in the ODI software and set as the golden standard. Then the ODI examination table was used to measure the deviation of the guide during fabrication. Examiners A and B measured 10 times separately. The reliability and the validity of the examination table was calculated. The second part was the in vivo study: The deviation during fabrication of 12 guides designed and fabricated by the ODI system were measured using the examination table. RESULTS:The standard deviation of the deviation measured using the examination table by examiners A and B were all below 0.40 mm (for the shell reference points) and 0.71 degree (for the angles). No significant difference was found between the two examiners for any implant sites. The result of the examination table was larger than that of the software for the shell reference point (t-test, P<0.05), but no significant difference was found for the angle deviation (t-test, P>0.05). The 45 implants positions in the 12 guides for the in vivo study were examined using the examination table. The deviations at the shell reference points were (1.06±0.29) mm (0.42-1.75 mm), and at the implant tip were (1.12±0.48) mm (0.41-2.44 mm). The angle deviations were (1.42±0.70) degree (0.29-2.96 degree). CONCLUSION:Deviation is unavoidable during the fabrication process of the guides. The examination table of the ODI system is a reliable and valid tool to measure the deviation during fabrication of the ODI guides. More studies should be designed to research the relationship between the fabrication deviation and the implant insertion deviation.

Application of a Dental Implant Surgical Guide by CAD/CAM Technique and Its Deformation Analysis

[Application of Computer Aided Design/computer Aided Manufactured Techniques in Mandible Defect Reconstruction].

Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An <i>in</i>-<i>vitro</i> study

[Application of Computer Aided Design-Computer Aided Manufacture Technique in Mandible Defect Reconstruction with Individual Titanium Prosthesis].

The application of implant surgery guide by CAD/CAM technique

Research On Digitalized Design Technology Of Teeth Shape Support Implant Guide Based On Image Guide

Accuracy of Different Types of Computer-Aided Design/computer-Aided Manufacturing Surgical Guides for Dental Implant Placement.

Accuracy of Computer-Guided Implant Surgery by a CAD/CAM and Laser Scanning Technique.

Case report: Fabrication of a dental implant guide based on tetrahedron positioning technology

In Vitro Accuracy Study of a Implanting NavigationTemplate

Accuracy of a Milled Digital Implant Surgical Guide: an in Vitro Study

Accuracy evaluation of a universal dental implant guide for simulating implantation in posterior area on dental molds

[Nonradiological methods for implant surgical guide accuracy measurement].

Interactive design of dental implant placements through CAD-CAM technologies: from 3D imaging to additive manufacturing

Accuracy of Implant Surgical Guides Fabricated Using Computer Numerical Control Milling for Edentulous Jaws: a Pilot Clinical Trial.

Accuracy of a Chairside, Fused Deposition Modeling Three-Dimensional-printed, Single Tooth Surgical Guide for Implant Placement: A Randomized Controlled Clinical Trial

A Simple and Automatic Method for Locating Surgical Guide Hole

[Evaluation of the Fabrication Deviation of a Kind of Milling Digital Implant Surgical Guides].

Accuracy of Intraoperative Measuring Guide and Conventional Surgical Guide in Anterior Implant Surgery: A Retrospective Case-Control Study

Clinical study of precision analysis and deviation control of a domestic guide plate-assisted edentulous implant surgery

The Establishment and Application of Computer-Aided Treatment Planning System for Dental Implant Placement