Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Algorithmic Complexity of Information Transport among Multiple Sensors in Gas-solid Fluidized Beds

INFORMATION TRANSMISSION AND FLOW REGIMES IDENTIFICATION IN GAS-SOLID FLUIDIZED BED

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental Studies of Information Entropy in Gas-Solid Fluidized Bed

INFORMATION TRANSPORT IN GAS-SOLID FLUIDIZED BED

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Measurement of Flow Pattern in Fluidized Bed Based on Acoustic Emission and Complexity Analysis

Soft-sensing System of Gas-Solid Fluidized Bed

COMPLEX STUDY OF FLOW REGIME CHARACTER AND IDENTIFICATION IN THE GAS-SOLID FLUIDIZED BED

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Flow Regime Identification Of Gas-Solid Fluidized Bed Based On Multi-Sensor Information Fusion

Monitoring of Particle Motions in Gas-Solid Fluidized Beds by Electrostatic Sensors

Study on identifying flow regime and transition based on fuzzy information fusion in gas-solid fluidized bed

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

MULTI-SENSOR DATA FUSION IN IDENTIFYING DIFFERENT FLOW REGIMES IN GAS-SOLID FLUIDIZED BED

Application of Complexity in Flow Regimes Identification of Gas-Solid Fluidized Beds

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

A Comparative Study of Electrostatic Current and Pressure Signals in a MSFC Gas–solid Fluidized Bed

Wavelet Analysis of Pressure Fluctuation Signals in a Gas-Solid Fluidized Bed