Abstract:Electrical impedance is an essential parameter for characterizing the performance of transducers during manufacturing and application phases. The conventional method to model the electrical impedance is based on Butterworth-Van Dyke (BVD) model with constant equivalent parameters, which is valid only in the neighborhood of resonance frequency. In this study, we present a method for modelling the electrical impedance over broadband featuring an improved BVD model with frequency-dependent equivalent parameters. In order to obtain frequency-dependent parameters from the measured impedance, estimation is performed in a constrained piecewise and stepwise manner. Firstly, a concise calculation method to obtain initial values of equivalent parameters is presented. Then, the original impedance is equally divided into multiple segments and the resonant segments containing the resonant frequencies are located. New impedance data is reconstructed with one of non-resonant segments and the resonant segments. Finally, with the initial values refined by genetic algorithm (GA), equivalent parameters are obtained from the reconstructed impedance based on GA. The estimation results are assigned to the central frequency point of the non-resonant segment. A new segment is generated by shifting the last non-resonant segment one frequency interval, and data reconstruction and estimation process are repeated till all parameters at each frequency are gained. Frequency-dependent parameters are obtained by the combination of a series of constant parameters at each frequency. The proposed method is verified with good accuracy in modelling of electrical impedance and transmitting response of broadband air-coupled transducer used for gas flow measurement which are difficult to be accurately modelled by the traditional method.

A General Simplified Model of Resonant Cavities and Its Analysis

Analytical Modeling of Resonant Converters in Frequency Domain for Wireless Power Transfer: Continuous Current Mode (CCM) Operation

Wideband Description of the Finite-Ground Coplanar Waveguide-Type Structures with Discontinuities

Study of the Partially Open Cavity's Resonant Character

Research of Coupling Coefficient Extraction of a Cavity Resonator

Analysis of Rib Waveguides with Trapezoidal Cross Section

Resonant Scattering from a Slit Coupled Cylindrically Eccentric Impedance Cavity: the Case of H-Polarized Plane Wave Incidence

Efficient Analytical Model for the Transfer Impedance and Admittance of Noncoaxial/Twinax Braided–Shielded Cables

Characteristic Analysis of Diffraction from Planar Waveguide

General Model of Multi-resonator Systems

Source Excitation and Parameter Extraction for Time-Domain Simulation of Rectangular Waveguides

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

Analyses of Whispering Gallery Modes in Circular Resonators by Transmission Line Theory

Frequency-dependent equivalent modelling of broadband air-coupled transducers

Transmission, S-matrix, and Partial Densities of States for Ac Transport Through a Resonant Cavity with Multileads

A Universal Model for Wide-Angle Crossed Waveguides and the Experimental Verification

RF Equivalent‐circuit Model of Interconnect Bends Based on S‐parameter Measurements

A Novel Combined Equivalent Networks Analysis for Power and Ground Planes with Narrow Slots

A Theory of Complex Open Resonators in the Form of Cavity Chain

Generalized Coupled-Mode Formalism in Reciprocal Waveguides with Gain, Loss, Anisotropy, or Bianisotropy

Physical Interpretation of the Generalized Reflection and Transmission Coefficients