Fabrication of Carbon Nanotube-film Coated Electrodes and Electroanalytical Applications

吴康兵,姚绍军,胡胜水

DOI: https://doi.org/10.3969/j.issn.1006-6144.2004.05.029

2004-01-01

Abstract:A brief review for the applications of carbon nanotubes in electroanalytical chemistry has been presented in this paper. The main topics include the fabrication of various carbon nanotube-films on the surface of electrode and their applications.

What problem does this paper attempt to address?

The Application of Carbon Nanotubes in Electroanalysis

袁倬斌,王月伶,张君,吕元琦

DOI: https://doi.org/10.3969/j.issn.0441-3776.2004.07.001

2004-01-01

Abstract:Carbon nanotubes have widely attracted attention and application since their discovery because of their unique properties. In this paper, the application in electroanalysis of carbon nanotubes has been reviewed.
The Application of Carbon Nanotubes in Biosensor

廖静敏,李光,马念章

DOI: https://doi.org/10.3969/j.issn.1004-1699.2004.03.028

2004-01-01

Abstract:Carbon nanotube is a kind of novel nano-material. The properties of novel carbon nanotubes modified electrodes permit an important decrease in the overvoltage for the redox of chemicals and a dramatic improvement in the reversibility of the redox behavior of biomolecules. The high surface area possessing abundant acidic sites is propitious to the immobilization of enzyme and promote electron transfer between redox center of enzyme and electrode surface, which will improve the sensitivity and stability of biosensor.
Application of Carbon Nanotube Modified Electrode in Bioelectroanalysis

Yue-Rong WANG,Ping HU,Qiong-Lin LIANG,Guo-An LUO,Yi-Ming WANG

DOI: https://doi.org/10.1016/S1872-2040(08)60052-3

IF: 1.193

2008-01-01

Chinese Journal of Analytical Chemistry

Abstract:A review is presented on the application of carbon nanotube modified electrode in bioelectroanalysis, which mainly includes electrochemical studies on neurotransmitters, proteins, nucleic acids, and other related micromolecules. The application and prospects of carbon nanotube modified electrode are also presented.
Fabrication and Electrochemical Properties of Free-Standing Single-Walled Carbon Nanotube Film Electrodes

Niu Zhi-Qiang,Ma Wen-Jun,Dong Hai-Bo,Li Jin-Zhu,Zhou Wei-Ya

DOI: https://doi.org/10.1088/1674-1056/20/2/028101

2011-01-01

Abstract:An easily manipulative approach was presented to fabricate electrodes using free-standing single-walled carbon nanotube （SWCNT） films grown directly by chemical vapor deposition.Electrochemical properties of the electrodes were investigated.In comparison with the post-deposited SWCNT papers,the directly grown SWCNT film electrodes manifested enhanced electrochemical properties and sensitivity of sensors as well as excellent electrocatalytic activities.A transition from macroelectrode to nanoelectrode behaviours was observed with the increase of scan rate.The heat treatment of the SWCNT film electrodes increased the current signals of electrochemical analyser and background current,because the heat-treatment of the SWCNTs in air could create more oxide defects on the walls of the SWCNTs and make the surfaces of SWCNTs more hydrophilic.The excellent electrochemical properties of the directly grown and heat-treated free-standing SWCNT film electrodes show the potentials in biological and electrocatalytic applications.
In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

C. H. Jin,J. Y. Wang,Q. Chen,L.-M. Peng

DOI: https://doi.org/10.1021/jp057240r

2006-01-01

Abstract:Individual amorphous carbon nanowires (a-CNWs) were fabricated inside a transmission electron microscope (TEM) by the electron beam induced deposition (EBID) method, and the a-CNWs were graphitized in situ by introducing Fe particles into these a-CNWs and controlled movement of the Fe particles in these CNWs. Detailed structural characterizations and electrical measurements were carried out, and it was found that the current-induced movement of Fe particles has significant effects in purifying the as-fabricated a-CNW, transforming the a-CNW into a graphitized-CNW (g-CNW). Two-terminal current voltage characteristics measurements showed that the g-CNW has a very good electrical conductivity with a resistivity of about 5.3 X 10(-4) Omega cm, a current carrying capacity of at least 4.35 mA, and a current density of 4.6 x 10(8) A/cm(2), and these values are comparable to those of multiwalled carbon nanotubes. Field emission characteristics of both a-CNWs and g-CNWs were also measured, and their respective Fowler-Nordheim plots were found to have basically a linear form.
Nanocarbon film electrodes for electro-analysis and electrochemical sensors

Zixin Zhang,Saki Ohta,Shunsuke Shiba,Osamu Niwa

DOI: https://doi.org/10.1016/j.coelec.2022.101045

IF: 8.5

2022-10-01

Current Opinion in Electrochemistry

Abstract:Carbon films fabricated by sputtering and a related vacuum technique have unique features as regards electrochemical performance including relatively high electrochemical activity, and a wide potential window with low noise, in addition to low cost and the capacity for fabrication with any shape and size. Various applications for detecting environmental and biochemical molecules have been reported in recent years. This review focuses on the fabrication, structure, and electrochemical properties of carbon film electrodes. The review also introduces applications of carbon, heteroatom doped and surface terminated carbon film electrodes for heavy metal detection, biomolecular sensing, and DNA methylation level quantitative analysis.

chemistry, physical,electrochemistry,materials science, multidisciplinary
Carbon Nanotubes And Their Potential Field Emission Applications

w i milne,k b k teo,n l rupesinghe,l gangloff,e minoux,j p schnell,d dieumegard,f peauger,p legagneux,d g hasko,g a j amaratunga,didier pribat

DOI: https://doi.org/10.1117/12.583352

2005-01-01

Abstract:Carbon nano-tubes are alternatives to conventional metal/silicon tips for field emission sources. They exhibit extraordinary field emission properties because of their high electrical conductivity, their high aspect ratio "whisker-like" shape for optimum geometrical field enhancement, and remarkable thermal stability. This paper will review the PECVD growth process, and the micro-fabrication techniques needed to produce well defined carbon nano-tube based micro-electron sources for use in a variety of applications.
Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

Ying Wu,Zhaoying Zhou,Xing Yang,Mingfei Xiao,Qingqing Luo,Jin Zhang,Ying Yin Zhang,Yagang Yao

2007-01-01

Indian Journal of Pure & Applied Physics

Abstract:Aligned array of single-walled carbon nanotubes on a substrate is synthesized by chemical vapour deposition of methane. The combined synthesis and FIB technique presented here demonstrated the nanotube devices with metallic electrodes. Sample characterization was carried out with SEM pictures and I-V curves, which show that the nanotube with metallic electrodes may be widely used in both basic research and applications.
Recent Advances in Metal/Alloy Nano Coatings for Carbon Nanotubes Based on Electroless Plating

Lei Zhang,Yi Chao,Kenan Yang,Daodao Xue,Shisheng Zhou

DOI: https://doi.org/10.3389/fchem.2021.782307

IF: 5.5

2022-01-06

Frontiers in Chemistry

Abstract:A large number of researches on the electroless plating of carbon nanotubes and their applications after plating have emerged, which has attracted more and more attention. In this review article, the existing electroless plating methods for carbon nanotubes were briefly summarized, and the surface coatings were listed and analyzed in detail. At last, the related applications after electroless metal/alloy coatings of carbon nanotubes were discussed in detail. This study aims to provide a reference for the research and improvement of different electroless metals/alloys coatings of carbon nanotubes. After a clear understanding of the electroless metal/alloy coatings of carbon nanotubes, the appropriate coating can be selected according to the actual situation, so that the carbon nanotubes after plating can be used as reinforcement and modification materials for better satisfaction of the needs, and the application of plated carbon nanotubes has reference significance in more fields.

chemistry, multidisciplinary
The Progress Of Carbon Nanotube In Analytical Chemistry

Zh Wang,G Luo

DOI: https://doi.org/10.3321/j.issn:0253-3820.2003.08.027

IF: 1.193

2003-01-01

Chinese Journal of Analytical Chemistry

Abstract:A review with 40 references is presented on the production, purification, modification of carbon nanotube and its applications in analytical chemistry. The application and prospect of carbon nanotube on analytical chemistry are introduced.
The fabrication of nanoelectrodes based on a single carbon nanotube.

Jun Shen,Wei Wang,Qing Chen,Mingsheng Wang,Shengyong Xu,Yinglin Zhou,Xin-Xiang Zhang

DOI: https://doi.org/10.1088/0957-4484/20/24/245307

IF: 3.5

2009-01-01

Nanotechnology

Abstract:Nanoelectrodes are fabricated from individual carbon nanotubes (CNTs) connected to tungsten probes or carbon fibers. The whole electrode was covered by an insulating HfO2 layer except for a section of conducting CNT at the apex. The fabrication process includes mounting individual CNTs to the conductive support through nanomanipulation, coating the whole probe by a dielectric layer using atomic layer deposition and removing the dielectric layer at the apex through a nanomanipulation process. Differential pulse voltammetry and cyclic voltammetry measurements show the CNT nanoelectrode has similar electrochemical behavior to the widely used carbon fiber probe, but has a much smaller active electrode area and can provide much higher spatial resolution and signal-to-noise ratio.
Preparation and Application of Multi-Walled Carbon Nanotubes and Metal Cobalt Nanoparticles Composite Carbon Fiber Electrodes

An-Kang Zhang,Hua Yuan,You-Qing Shen,Bing Yu,Hai-Lin Cong

DOI: https://doi.org/10.1080/00150193.2018.1450565

2018-01-01

Ferroelectrics

Abstract:Carbon nanotubes and cobalt nano-particles were compounded to the surface of the carbon fiber by the vapor deposition method and the electrochemical deposition method respectively. In this study, novel Co@carbon nanotubes (CNTs)@carbon fiber (CF) composites were fabricated to be electrode by a simple and facile approach. It increases the specific surface area, conductivity and catalytic activity of carbon fiber electrode. It can be used to detect nitrate ions.
Synthesis and Application of Carbon Nanotubes

吴德海,朱宏伟,张先锋,李延辉,韦进全,李雪松,郝东晖

DOI: https://doi.org/10.3321/j.issn:1000-0054.2003.05.002

2003-01-01

Abstract:The past ten years' research into carbon nanotubes and their related materials was summarized in the Nanocarbon Laboratory, Department of Mechanical Engineering, Tsinghua University. The floating catalytic method was used for synthesis of multiwalled carbon nanotubes, singlewalled carbon nanotubes, doublewalled carbon nanotubes and aligned carbon nanotube films. Characteristics of different carbon nanotubes were studied with respect to mechanics, electricity, composites, double layer capacitors, field emission, hydrogen storage and environmental protection. The results show that carbon nanotubes, with various mechanical, electric and adsorptive behavior, are potentially applicable to many fields.
Fabrication of carbon nanotube field emission film by electrophoresis deposition and sintering

Yitian Peng,Yuanzhong Hu,Hui Wang

DOI: https://doi.org/10.1016/j.colsurfa.2008.07.021

2008-01-01

Abstract:Multi-wall carbon nanotube (MWCNT) films were prepared on the stainless steel plate using electrophoresis deposition and sintering techniques in this paper. The MWCNT film adsorbed strongly onto the substrate after the sintering process in the furnace. The MWCNT film exhibits excellent field emission properties with high emission current densities, low threshold electric fields and good field mission stability.
Low Cost Fabrication Of Thin Film Carbon Nanotubes With Various Transparencies

hosea tantang,c l loh,j y ong,jinquan wei,l j li

DOI: https://doi.org/10.1115/IMECE2009-10555

2010-01-01

Abstract:Carbon nanotube was known for years to possess extraordinary properties, one of them is its high mobility and current carrying capability. Hence the most direct application that could make use this property would be electrodes. The main advantages of making use of carbon nanotube as electrodes are: low material cost due to abundant raw materials, solution process able, and could be used for application requiring transparencies. However, despite its simple procedure, there are many fabrication parameters that require thorough investigation, starting from selection of raw materials, solubilization methods, and deposition methods. In addition to that there are post fabrication steps that need to be carried out to obtain desirable properties of electrodes. Herein, we report fabrication method of carbon nanotube electrodes using air-gun spraying. Fabrication parameters and post fabrication steps were investigated to obtain high conductivity electrodes. Electrodes with different range of transparencies was fabricated starting from 85% transmittance at 550 nm, which could be used as replacement of common transparent electrodes (i.e ITO), up to totally opaque films, which can be used as interconnects.
Pre-Treatment And Liquid-Phase Fabrication Of Carbon Nanotube Films

Lr Guo,Xy Ye,Mm Tan,Xh Wang,Zy Zhou

2005-01-01

Abstract:In this paper, a serial of treatment methods of as-prepared carbon nanotubes (CNTs) are described including filtration, oxidation and decentralization. After treatment, steady CNT suspension is obtained, and little impurity is observed in the treated CNTs. Also, a liquid-phase fabrication method of CNT film based on electrophoresis deposition is presented, and patterned CNT films have been fabricated on patterned electrodes. Further, mechanism analyses have been carried out about both the pre-treatment and the electrophoresis deposition.
Application of Novel Carbon Nanomaterials to Electrochemistry

Feng Xiaomiao,Li Ruimei,Yang Xiaoyan,Hou Wenhua

2012-01-01

Progress in chemistry

Abstract:Recently, carbon nanomaterials have received great interest because of their unique mechanical, electrical, and chemical properties. Especially, some kinds of novel carbon materials including carbon nanofibers, carbon nanotubes, and graphene with large specific area, high conductivity, and good biocompatibility become research focus. These novel carbon nanomaterials have been applied in many fields due to their unique physical and chemical properties. Especially, carbon nanomaterials have shown their unique advantages in electrochemical field. This paper mainly review the application of carbon nanomaterials to electrochemistry including biosensor, supercapacitor, and fuel cell. Carbon nanomaterials have an important role in bioelectrochemical catalytic reaction due to that carbon nanomaterials have high specific area and excellent biocompatibility. Therefore, it can improve the electron transfer rate of enzyme. The biosensors based carbon nanomaterials have high sensitivity, broad linear range, and good stability and reproducibility. Carbon nanomaterial is the earlist and the best one in the supercapacitor electrode, materials. The supercapacitor prepared by carbon nanomaterials has good cycle stability. The specific capacitance can be enhanced through the combination of carbon nanomaterials and pseudo-capacitors electrode materials. Carbon nanomaterials can act as the catalysts of fuel cell as well. It can improve the energy density, fuel utilization, and the ability to resist poisoning.
Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

Kai-Xuan He,Juan Su,Deng-Zhu Guo,Ying-Jie Xing

DOI: https://doi.org/10.1109/ivesc.2010.5644422

2010-01-01

Abstract:Summary form only given. We present a simple technology for the fabrication of CNTs films cathode by utilizing method of rubbing CNT powders onto the polished substrates. The metallic substrates were polished by 10000 mesh white fused alumina powder at first. Then, the CNTs were rubbed on them. After that process, the metallic substrates were covered by CNTs films uniformly and firmly, as characterized by scanning electron microscope and scotch tape peeling tests. The field-electron-emission properties of such films cathodes were investigate under the vacuum of 10-5 Pa. The experimental results showed that the field-emission image of the films was nearly uniform and the emission current was considerably large. The turn-on field (the field at an emission current density of 10μA/cm ) was 3.4V/μm. The emission current density of 1.31mA/cm was obtained at the electric field of 6.1 V/μm, and emission current was almost stable in more than 60 minutes under about ImA/cm .
Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

Yongjie Yan,Mengqi Duan,Haotian Zheng,Qi Ni,Wenbin Huang,Qing-Qing Ni

DOI: https://doi.org/10.1557/s43578-024-01289-6

IF: 2.7

2024-02-07

Journal of Materials Research

Abstract:Carbon nanotube fiber (CNTF) has promising applications in the fields of electronic devices, sensors, smart fabrics, electrochemical electrodes, electromagnetic shielding, electric heating elements, and composite materials due to its excellent thermal and electrical properties. In this research, the CNTF was continually prepared through floating catalyst chemical vapor deposition (CVD) using a systematic high-temperature shaft furnace equipment. As for applications, an electrochemical electrode based on the CNTF wrapping showed stronger current responding signal due to its high specific surface. Then, a CNTF-based electrothermal element could heat 25 ml water up to 40 °C within 0.5 h. After that, a unidirectional electrically conductive tape based on the CNTF showed different electromagnetic shielding with changing wave vibration direction. Following with that, a CNTF tubular composite was also successfully fabricated showed more light-weight property. Finally, the electrical variation under different forces was studied for the exploration of the CNTF in implantable biosensing electrode.Graphical abstract

materials science, multidisciplinary
The fabrication of short metallic nanotubes by templated electrodeposition

Chienwen Huang,Yaowu Hao

DOI: https://doi.org/10.1088/0957-4484/20/44/445607

IF: 3.5

2009-11-04

Nanotechnology

Abstract:Template-based electrochemical synthesis has widely been used to produce metal nanowires and nanorods. Commercially available filtration membranes, such as anodic aluminum oxide (AAO) and polycarbonate track etch membranes, have commonly been utilized as hard templates for this purpose. In this process, a thick metal film is usually sputtered or vacuum evaporated onto one side of the membrane to block the pores and serve as the working electrode for the subsequent electrodeposition. Here, we show that during the deposition of the metal electrode for AAO membranes, the electrode metal diffuses into the pores and is deposited on the pore walls which leads to preferential electrodeposition of metal on the walls and therefore forms metal tubes. This phenomenon has been utilized to fabricate short nanotubes by carefully controlling the electrodeposition conditions. The process is a straightforward method for any electroplatable materials to form nanoscale tubular structures. The effects of working electrodes and electrodeposition conditions on the formation of tubular structures are discussed in detail. A new mechanism based on this simple fact is proposed to explain the formation of Ni tubes by Ni-Cu co-deposition. Also, we demonstrate how to distinguish magnetic nanotubes from nanorods by a simple magnetic measurement.

Fabrication of Carbon Nanotube-film Coated Electrodes and Electroanalytical Applications

The Application of Carbon Nanotubes in Electroanalysis

The Application of Carbon Nanotubes in Biosensor

Application of Carbon Nanotube Modified Electrode in Bioelectroanalysis

Fabrication and Electrochemical Properties of Free-Standing Single-Walled Carbon Nanotube Film Electrodes

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Nanocarbon film electrodes for electro-analysis and electrochemical sensors

Carbon Nanotubes And Their Potential Field Emission Applications

Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

Recent Advances in Metal/Alloy Nano Coatings for Carbon Nanotubes Based on Electroless Plating

The Progress Of Carbon Nanotube In Analytical Chemistry

The fabrication of nanoelectrodes based on a single carbon nanotube.

Preparation and Application of Multi-Walled Carbon Nanotubes and Metal Cobalt Nanoparticles Composite Carbon Fiber Electrodes

Synthesis and Application of Carbon Nanotubes

Fabrication of carbon nanotube field emission film by electrophoresis deposition and sintering

Low Cost Fabrication Of Thin Film Carbon Nanotubes With Various Transparencies

Pre-Treatment And Liquid-Phase Fabrication Of Carbon Nanotube Films

Application of Novel Carbon Nanomaterials to Electrochemistry

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

The fabrication of short metallic nanotubes by templated electrodeposition