Abstract:Impacts generated from the surface of a stator rubbing against the surface of a rotor during its rotation is a common defective phenomenon which often occurs in a rotating machine. The rubbing often occurs at the positions with small clearances in rotating machinery. This defect may deteriorate rapidly and finally cause the catastrophic breakdown of the machine. It will not only interrupt services or production, but also lead to substantial economic loss. To further understand the rubbing-caused impacts, a detailed analysis is presented in this paper to explain the cause of rubbing, its occurrence and phenomenon if the severity of rubbing becomes serious. A comparison has also been conducted to investigate the effectiveness of monitoring the rubbing-caused impacts by using conventional scalograms and reassigned scalograms. The results show that when rubbing occurs, its impacts lead to an increase of magnitudes not only at the fundamental rotational frequency and its harmonics, but also at some high-frequency components. The more severe the rubbing, the higher and the more components at high frequencies. Both the simulated rubbing signals and experimental rubbing signals collected from a test rig have proven that the method of reassigned scalograms is more effective in measuring rubbing-caused impacts as it can provide a better concentration of impacts with less interference. Moreover, the exact occurrence time and frequency of impacts are also easier to be identified. In summary, the phenomenon of having more high-frequency components due to the increasing severity in rubbing, and the clear identification of impacts provided by reassigned scalograms, can definitely help a machine operator to detect the occurrence and determine the severity of rubbing occurring between the stator and the rotor of a rotary machinery.

Study on Rotor/Stator Impact Fault Diagnosis in Turbo Generator Based on the Singular Spectrum Theory and Wavelet Transform

Stator Fault Detection Of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum

Research on the Fault Diagnosis Method for Slip Ring Device in Doubly-Fed Induction Generators Based on Vibration

A New Fault Diagnosis Method for a Rotor of a Steam Turbine Generator Set Based on Instantaneous Energy Distribution Characteristics

APPLICATION OF WAVELETS TO TURBOGENARATOR UNIT FOR IMPACE FAULT DETECTION

Signal Analysis on Flexural and Torsional Vibration of Generator Shafts Impacted by Subsynchronous Resonance

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Time-frequency Analysis on Torsional Vibration of Turbo-generator Shafts

USING WAVELET METHOD TO ANALYZE FAULT FEATURES OF RUB ROTOR IN GENERATOR

Harmonic Wavelet Package Method Used to Extract Fault Signal of a Rotation Machinery

Fault Diagnosis Meheod of Transverse Crack for Rotor Based on HHT

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Diagnosis of generator rotor inter-turn short-circuit based on wavelet analysis

STUDY ON METHODS OF VIBRATION FAULT DIAGNOSIS BASED ON TIME-FREQUENCE CONTOUR MAP FOR TURBINE GENERATOR UNIT

Online Identification Methodology of Field Winding Short Circuit Fault of Turbogenerator

Gear Fault Diagnosis of Wind Turbine Based on Discrete Wavelet Transform

Experimental Study on Vibration Analysis of Rotor–Stator Rub Defect in a Gas Turbine Generator Set

Fault Diagnosis of Rolling Bearing Based on Wavelet Packet and Fourier Analysis

Application of wavelet time-frequency analysis on fault diagnosis for steam turbine

Detection of the Rubbing-Caused Impacts for Rotor–stator Fault Diagnosis Using Reassigned Scalogram