Abstract:Reversible pump turbine (RPT) is designed for pumping water from a lower reservoir to a higher reservoir by using the surplus energy in the power grids. Furthermore, this water have to go down to generate electrical energy by RPT at peak hours or in case of emergency. RPT have to change the working condition between pump mode and turbine mode [1]. In order to meet the requirement of power grid, RPT usually works at low load off-design working condition. Due to RPT’s special way of operating, it’s hard to guarantee the stability of the units. Few years ago, both in TianHuangping pump storage power station [2] and YiXing pump storage power station [3], the abnormal sound and vibration occurs at the distributor of the RPT which in the pump mode when the guide vane opening is very small. In order to resolve this problem, B Nennemann [4] has conducted a detailed research about the abnormal phenomena which happened in YiXing pump storage power station by using 2-D periodical CFD simulation. Eventually, the author acclaimed that the unexpected bi-stable flow conditions and a self-excited torsion mode flutter vibration of the guide vane caused this problem, moreover, the vibration problem can be eliminated by modifying the shape of the guide vane successfully. Addressing the issue of TianHuangping, H G Fan [5] studied the HT of the guide vane of the RPT during the startup process and shutdown process in turbine mode by 2-D periodical CFD simulation. His work indicated that repeating reversal of fluid occurs when the guide vane at slight opening during the shutdown process in turbine mode. This phenomena finally results in the dramatically increasing of the HT which makes the vibration happens. Our previous work [6] has performed the 3-D CFD simulation of the startup process of the pump turbine of Tian Huangping pump storage power station which in the pump mode by implementing the dynamic meshing technique. The results indicates that the main flow between the guide vanes has experienced a deflection when the guide vane opening is very small, and this deflection leads to the sharply changing of the hydraulic torque on the guide vanes, if the transmission of the distributer cannot adapt this changing immediately, the vibration and abnormal sound will occur in the unit. Based on the previous flow field analysis [6] of the dynamic process. This paper presents a structural characteristic analysis of the guide vanes when the pump turbine works in pump mode at slight opening region. The one-way FSI method was carried out to calculate the structural characteristic of guide vanes during the main flow deflection process. And the vibration characteristic of the guide vanes were analyzed. The result shows that the position of the guide vane has a significant influence on the stress and strain of guide vanes.

Analysis on rotor-stator interaction and vibration of pump turbine in pumped storage power station

A Simulation Study of Hydraulic Vibration caused by Clearance Flow in a Pump Turbine

Analysis of Inter-blade Vortex and Runner Blades Force of Pump Turbine during Load Rejection Period

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Pressure pulsation in small opening operating mode of pump turbine’s turbine mode

Analysis of Rotor-Stator Interaction of a Pump-Turbine with Splitter Blades in a Pump Mode

Analysis of Flow and Runner Dynamic Response Characteristics under Pump Conditions of Variable-Speed Pump Turbine

Transition of amplitude–frequency characteristic in rotor–stator interaction of a pump-turbine with splitter blades

Experimental and Numerical Investigation of Rotor–Stator Interaction in a Large Prototype Pump–Turbine in Turbine Mode

Discussion on the Issues of Rotor-Stator Interference in Pump Turbine

Influence analysis of lower labyrinth pressure pulsation for stability of pumped-storage unit

S-shaped characteristics of pump turbine with large guide vane opening by experimental and numerical analysis

Pump-turbine Rotor-Stator Interaction Induced Vibration: Problem Resolution and Experience

Numerical Study on the Flow and Structural Characteristics of a Large High Head Prototype Pump-Turbine under Different Operating Conditions

Dynamic Characteristic Analysis of a Pump-Turbine Unit under the High Pressure Pulsation Operating Condition - Fluid Dynamics Analysis

Numerical Investigation on the Unstable Flow and Its Interaction with the Hump Characteristic in a Pump Turbine at Pump Mode

Fluid-Structure Coupling Analysis of a Pump-turbine Unit During the Pump Shutdown Transient Process

Fluid-Structure Interaction Analysis for Resonance Investigation of Pump-Turbine Runner

Vibration control on coupled unit-plant structure of pumped storage power station during sudden load-up process

Study on the flow characteristic of pump turbine at partial load

Structural characteristic analysis of the guide vanes of a pump turbine which working at the slight opening region